Philips Master TL D 36W 830 G13 Secura

Cap-Base G13 [Medium Bi-Pin Fluorescent]
Bulb T8 [26 mm]
Life to 10% failures EM 12000h
Life to 10% fail Preheat EL,3h 17000h
Life to 10% fail Nonpreh EL,3h 10000h
Life to 50% failures EM 15000h
Life to 50% fail Preheat EL,3h 20000h

Color Code 830 [CCT of 3000K]
Color Rendering Index 85 Ra8
Color Designation (text) Warm White
Color Temperature 3000K
Luminous Flux EM 25 °C, Rated 3200 lm
Luminous Flux EM 25 °C, Nominal 3200 lm
Lum Efficacy Rated EM 25 °C 89 lm/W
LLMF EM 2000h Rated 96%
LLMF EM 4000h Rated 95%
LLMF EM 6000h Rated 94%
Design Temperature 25 C
Chromaticity Coordinate X 444 -
Chromaticity Coordinate Y 410 -

Lamp Wattage 36W
Lamp Wattage EM 25 °C, Nominal 36W
Lamp Wattage EM 25 °C, Rated 36W
Lamp Voltage EM 25 °C 103V
Lamp Current EM 25 °C 0.440A
Dimmable Yes

Energy Efficiency Label (EEL)A
Mercury (Hg) Content 2 mg
Energy consumption kWh/1000h 42 kWh

Erythemal Radiation <=320 nm 0.2 mW
Erythemal Radiation >320 nm 10 mW
Damage Factor D/fc 0.13 -

Base Face to Base Face A 1199.4 (max) mm
Insertion Length B 1204.1 (min), 1206.5 (max) mm
Overall Length C 1213.6 (max) mm
Diameter D 28 (max) mm

-Special protective coating around the lamp, prevents products from contamination in case of accidental lamp breakage; easily recognized in audit situations by two blue rings at one end
-Protects products from discoloring and loss of taste by 90% lower UV-emission
-Makes luminaires compliant with relevant standards in the industry, such as HACCP, ISO 22000 and IEC 61549: Fragment Retention Lamp Standard

Features
-Protective coating (Surlyn) around the lamp, indicated by two blue rings at one lamp end. This lamp is NOT meant for application in closed luminaires
-Fully compliant with IEC 61549 - Fragment Retention Lamp Standard and with relevant standards in the food industry, such as HACCP and ISO 22000
-No degradation under influence of temperature or UV
-Coating blocks 90% of UV emission of the lamp
-Fully recyclable, including the protective lamp coating
-Relatively high efficacy, both initially and during lamp lifetime, with high lumen maintenance

Applications
-For use where contamination resulting from lamp breakage must be prevented, e.g. in food preparation, health care, pharmaceuticals, cleanrooms etc.
-Suitable for use in environments with increased risk of breakage, e.g. sports halls
-Suitable for use in environments where UV emission should be reduced (museums, libraries, archives, food industry, fashion shops, etc.)