Master TL 18W 840 G13 xtreme secura fluorescent lamps

Illuminate your space with the Fluorescent Lamp Master TL-D 18W 840 G13 Xtreme Secura. Enjoy bright, energy-efficient lighting that lasts longer.

Cap-Base G13
Bulb Shape T8 [ 26 mm (T8)]
Life To 50% Failures 47000 h
Life To 50% Failures Preheat 79000 h
LSF 2000 h Rated 100%
LSF 4000 hRated 99%
LSF 6000 hRated 99%
LSF 8000 hRated 99%
Color Code 840 [ CCT of 4000 K (841)]
Luminous Flux 1300 lm
Luminous Flux (Rated) 1300 lm
Color Designation Cool White (CW)
Chromaticity Coordinate X 383
Chromaticity Coordinate Y 381
Correlated Color Temperature 4100 K
Luminous Efficacy (rated) 73 lm/W
Color Rendering Index 85
LLMF 2000 h Rated 96%
LLMF 4000 hRated 95%
LLMF 6000 hRated 94%
Power (Rated) 17.7 W
Lamp Current 0.370 A
Voltage 56 V
Design Temperature 25 °C
Dimmable Yes
Cap-Base Information Green Plate
Energy Efficiency Label (EEL)A
Mercury (Hg) Content 3 mg
Energy Consumption kWh/1000 h 21 kWh
Base Face to Base Face A 589.8 (max) mm
Insertion Length B 594.5 (min), 596.9 (max) mm
Overall Length C 604 (max) mm
Diameter D 28 (max) mm
• Special protective coating around the lamp prevents products from contamination in case of accidental lamp breakage, easily recognized in audit situation by one blue ring at one end
• The protective coating has a high temperature-resistance and no degradation to be expected under influence of temperature or UV within specified lamp life (50% failures @ 3 hrs switching cycle)
• Makes luminaires compliant with relevant standards in the industry, such as HACCP, ISO 22000 and IEC 61549

Features
• Protective coating (Teflon) around the lamp, indicated by one blue ring at one end
• Extremely long life and high reliability, identified by x-shaped end-cap to distinguish the lamp from other fluorescent lamps
• Recommended to use with electronic gear that allows higher efficacy and longer lifetime
• Use in open and closed luminaires possible (as indicated by one blue ring), due to strong, temperature-resistant coating

Applications
• Food andamp; beverages and pharmaceuticals industry: factories, distribution centres, retail outlets; locations where maintenance and/or process disruption costs are high (high ceilings, difficult access)

General safety informations