LED power supplies

Osram Optotronic OT 150/220V 700mA 3DIMLT+ E Led

978202 | Manufacturer: Osram | EAN: 4008321978202 | MPN: OT-150-220-240-3DIMLT


105,05 €tax excl.

Price for 1 piece, excluding shipping costs!
Condition: New product
Factory Box - pieces (pcs): 10

By buying this product you can collect up to 21 loyalty points. Your cart will total 21 points, that can be converted into a voucher of 2,10 €.

-+

More info

More info

OPTOTRONIC Constant current Led power supply with 3DIM/DALI.


Nominal voltage 220…240V
Input voltage AC 195…264V
Nominal current 0.72A
Mains frequency 50…60Hz
Nominal input voltage (SD port) 220…240V
Power factor λ 0.95/0.90
Total harmonic distortion 10%
Device power loss 15W
Inrush current 58A
Max. ECG no. on circuit breaker 10A (B) 4
Max. ECG no. on circuit breaker 16A (B) 9
Max. ECG no. on circuit breaker 25A (B) 20
Surge capability (L/N-Ground) 6 kV
Surge capability (L-N) 6 kV
Surge capability (L/N – SD) 4 kV
Surge capability (SD – Ground) 4 kV
Nominal output power 150W
ECG efficiency 90.5%
Nominal output voltage 95…335V
U-OUT (working voltage) 350V
Nominal output current 350…700 mA
Output current tolerance ±5%
Minimum output current 75 mA

Mounting hole spacing, length 160 mm
Mounting hole spacing, width 90 mm
Length 170 mm
Width 100 mm
Height 40 mm
Cable cross-section, input side 0.25…2.5mm²
Cable cross-section, output side 0.25…1.5mm²
Wire preparation length, input side 10…11 mm
Ambient temperature range -30…+55 °C
Temperature range at storage -20…80 °C
Maximum temperature at tc test point 85 °C
Max.housing temperature in case of fault 120 °C
ECG lifetime 85000h
Dimmable Yes
Dimming interface 3DIM / DALI / StepDIM / AstroDIM
Dimming range 10…100%
Suitable for fixtures with prot. class I / II
Constant lumen function Programmable
NTC input Yes
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/Led module 2.0m
Type of protection IP20
Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015: 2006 + A1: 2007 + A2: 2009/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to EN 61547/Acc. to IEC 62386-101/Acc. to IEC 62386-102/Acc. to IEC 62386-207
Approval marks – approval CE / ENEC 10 / VDE
Temperature range at storage -20…80 °C
Relative humidity 5…85%

Benefits
- Large output power range: up to 150W
- High surge protection: up to 4/6 kV (L-N), 4/6 kV (L/N-PE)
- Different dimming modes and levels can be set
- Stand-alone dimming function enables operation in existing installations

Areas of application
- Suitable for luminaires of protection classes I and II
- Suitable for outdoor applications in luminaires with IP > 54

Features
- 3DIM functionality (StepDIM/AstroDIM/DALI)
- Current output range: 75…700 mA
- Flexible current setting
- Constant lumen function
- Overtemperature protection via external NTC (3DIMLT+ version only)

Equipment / Accessories
- DALI magic hardware for configuring 3DIM ECGs necessary

DimmableYes
Voltage - Volt (V)220
Current - Ampere (A)0.7
Wattage - Watt (W)150
Energy consumption - (kWh / 1000h)150
International Protection Marking - (IPXX)IP20
Lifetime - hours (h)85000
Factory Box - pieces (pcs)10

General safety informations

Questions

Questions

Be the first to ask a question about this product!


Question about the product

* Required fields
Reviews

Reviews

Write your own review

Viewed

Shopping cart

No products

To be determined Shipping
0,00 € Total

Prices are tax excluded

Add to compare

    There are no products selected for comparison.