Ballasts, electronic HID
PTO 35/220 240
956323 | Manufacturer: Osram | EAN: 4008321956323 | MPN: PTO-35
POWERTRONIC OUTDOOR PTo ECG for HID lamps, for outdoor lighting.
By buying this product you can collect up to 17 loyalty points. Your cart will total 17 points, that can be converted into a voucher of 1,70 €.
Lamp wattage 39W
Line current 0.20A
Ignition voltage 4.5 kVp
Operating frequency 0.165 kHz
System wattage 43W
ECG efficiency 90%
Input voltage 220…240V
Voltage range 198…264V
Mains frequency 50…60Hz
Power factor λ 0.95
Inrush current 30A
Max. no. of ECGs on circuit breaker 10A 15
Max. no. of ECGs on circuit breaker 16A 26
Max. no. of ECGs on 16A MCB with EBN-OS 65
Protective conductor current 0.1 mA
U-OUT 250
Max. working voltage between LH and LL 250V
Max. working voltage betw. LL/LH and earth 250V
Max. capacitance of wire ECG/lamp 120 pF
Surge capability (L-N) 3 kV
Surge capability (L/N-Ground) 4 kV
Length 133 mm
Width 77 mm
Height 48 mm
Mounting hole spacing, length 123 mm
Cable cross-section, input side 0.5…2.5mm²
Cable cross-section, output side 0.5…2.5mm²
Wire preparation length, input side 10…11 mm
Wire preparation length, output side 10…11 mm
Casing material Plastic
Ambient temperature range -25…+60 °C
Maximum temperature at tc test point 75 °C
ECG lifetime 60000h
Required IP rating of luminaire ≥ 54
Design / version ECG outdoor
Encapsulated Yes
System guarantee level 3c
Maximum wiring length ECG/lamp 1.5m
Overheating protection Power reduction and switch off at T > 75 °C at the tc point
ECG reset time > 0.5s
Dimmable No
Restriction on ignition time 20 min
Suitable for fixtures with prot. class I / II
Lightning stroke protection With connected equipotentiality-terminal 10 surges with 10 kV acc. to IEC 61000-4-5
Approval marks – approval ENEC 10 / VDE / VDE-EMC / GOST / C-Tick
Type of protection IP20
EEI – Energy Label A2
Standards acc. to EN 61347-2-12/acc. to EN 55015/acc. to EN 61000-3-2/acc. to EN 61547
Product benefits
-Energy savings up to 30% (compared to CCG operation) thanks to 3DIM (except PTo 35)
-High surge protection: up to 3 kV (L-N) / 4 kV (L/N-PE)
-Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
-Excellent thermal behavior for very high limit temperatures tc and ta
Areas of application
-Suitable for luminaires of protection classes I and II
-Suitable for outdoor applications in fixtures with IP > 54