PTI 35 220 240 HID electronic ballasts

Osram PTI 35 220 240 HID electronic ballasts S Ballast. Upgrade your lighting with the PTI 35 220 240 S HID electronic ballast. Experience superior performance and efficiency for brighter spaces.

Lamp wattage 39 W
Line current 0.19 A
Ignition voltage 4.5 kVp
Operating frequency 0200…0.240 kHz
System wattage 43 W
ECG efficiency 91%
Input voltage 220 - 240 V
Voltage range 198 - 264 V
Mains frequency 50 - 60 Hz
Power factor λ 0.95
Inrush current 30 A
Max. no. of ECGs on circuit breaker 10 A 15
Max. no. of ECGs on circuit breaker 16 A 26
Max. no. of ECGs on 16 A MCB with EBN-OS 65
Protective conductor current 0.25 mA
U-OUT 250 V
Max. working voltage between LH and LL 250 V
Max. working voltage betw. LL/LH andamp; earth 250 V
Max. capacitance of wire ECG/lamp 120 pF
Length 110 mm
Width 75 mm
Height 30 mm
Mounting hole spacing, length 99 mm
Mounting hole spacing, width 64 mm
Cable cross-section, input side 0.5-2.5 mm²
Cable cross-section, output side 0.5-2.5 mm²
Wire preparation length, input side 10…11 mm
Wire preparation length, output side 10…11 mm
Casing material Metal
Ambient temperature range –25…+65 °C
Maximum temperature at tc test point 85 °C
ECG lifetime 50000 h
Design / version Built-in unit
System guarantee level 3c
Maximum wiring length ECG/lamp 1.5m
Overheating protection Power reduction and switch off at T > 85 °C at the tc point
Overvoltage protection at 275…300 V 48 h
Overvoltage protection at 300…320 V 2 h
Overvoltage protection at 320…350 V 5 min
ECG reset time > 0.5s
Dimmable No
Restriction on ignition time 20 min
Suitable for fixtures with prot. class I
Approval marks - approval ENEC 10 / VDE / VDE-EMC / GOST / C-Tick
Type of protection IP20
EEI - Energy Label A2
Standards acc. to EN 61347-2-12/acc. to EN 55015/acc. to EN 61000 - 3-2/acc. to EN 61547

Benefits
• Long reliable life at maximum permitted temperatures
• Compact dimensions and low weight for small luminaire designs
• Excellent thermal behavior for very high limit temperatures tc and ta
• Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)

Areas of application
• Shop lighting
• Health and fitness areas
• Effect and accent lighting

General safety informations