Ballasts, electronic, dimmable DALI

Osram QTi DALI T-E 1x18 57W 220V DIM Quicktronic intelligent

060808 | Manufacturer: Osram | EAN: 4008321060808 | MPN: QTI-DALI-T-E-18-57

45,18 €tax excl.

Price for 1 piece, excluding shipping costs!
Condition: New product
Factory Box - pieces (pcs): 20
By buying this product you can collect up to 9 loyalty points. Your cart will total 9 points, that can be converted into a voucher of 0,90 €.


More info

More info

QUICKTRONIC INTELLIGENT DALI DIM CFL. ECG for compact fluorescent lamps and fluorescent lamps.

Nominal voltage 220 - 240 V
Mains frequency 50 - 60 Hz
DC voltage 154…276 V
Operating frequency 42…130 kHz
Max. no. of ECGs on circuit breaker 10 A 12
Max. no. of ECGs on circuit breaker 16 A 19
Starting time 0.6 s
Length 123 mm
Width 79 mm
Height 33 mm
Mounting hole spacing, length 129.5 mm
Mounting hole spacing, width 67 mm
Cable cross-section, input side 0.5-1.5 mm²
Ambient temperature range –10…+50 °C
Optional cable clamp, see chapter ECG mountings - cable clamp
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range 3…100%
Dimmable Yes
Overheating protection Yes
Suitable for fixtures with prot. class I
End of lamp life safety shutdown EOL T.2
Approval marks - approval VDE / E1 approval / VDE-EMC
EEI - Energy Label A1 BAT
Standards acc. to EN 61347-2-3/acc. to EN 60929/acc. to EN 55015: 2006 + A1: 2007/acc. to EN 61000 - 3-2/acc. to EN 61547

• Easy change of defect ECG thanks to available System+ Guarantee
• Easy integration in luminaire thanks to same dimensions like DALI GI ECG
DALI product features
• Control via the DALI interface
• Compliance with the DALI standard to IEC 60929 and IEC 62386
• Control input protected against overvoltage and polarity reversal (Osram ECG)
Touch DIM and Touch DIM Sensor function
• Manual dimming without any controller and with standard switches
• Including memory function (double click) and soft start

• Suitable for emergency light installations

• Corridor function for direct connection of ECG to common motion sensor
• Corridor function with pre-programmed light program
• TouchDIM function for free parameterization of light value and turn on time
• Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
• Fit for Emergency function for automatic detection of emergency lighting by ECG
• Very low standby power consumption: < 0.2 W (A1 BAT)
• Lifetime: up to 100000 h (temperature at Tc = 65 °C, max. 10% failure rate)
• Very high number of switching cycles: up to 300000
• Dimming range: 1…100% (3…100% with compact fluorescent lamp)
• POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime
• Line frequency: 0 Hz, 50 Hz…60 Hz, rectified

Voltage - Volt (V)220
International Protection Marking - (IPXX)IP20
Lifetime - hours (h)100000
Factory Box - pieces (pcs)20

General safety informations



Be the first to ask a question about this product!

Question about the product

* Required fields



Write your own review

Customers who bought also bought:


Shopping cart

No products

To be determined Shipping
0,00 € Total

Prices are tax excluded

Add to compare

    There are no products selected for comparison.