Philips HF P 136 TL D III 220V

Application code III
Rated Lamptype TL-D
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 36W
Line Voltage 220-240V
Line Frequency 50/60Hz
Housing L 280x30x28
Energy Efficiency Index A2 BAT
Lifetime 90% surv.@Tcaselife 50000h
Ignition Method Programmed Start

Automatic restart Yes
Ignition time 0.9 (max) s
Operating frequency 45 kHz
Mains voltage safety (AC) -10% /+10%
Mains voltage performance (AC) -8% /+6%
Inrush current Peak 18 (max) A
Inrush current Width 0.25ms
Earth leakage current 0.5 mA
Power losses gear 3.5W
Constant wattage deviation -2% /+2%
Ballast Lumen Factor 1
PowerFactor 100% output power 0.98 -
Battery voltage lamp ignition 186-275V
Battery voltage running lamps 186-275V
Overvoltage protection 320Vac 48 hr
Overvoltage protection 350Vac 2 hr
Crestfactor 1.7 (max) -
Hum and Noise level < 30 dB(A)

Cable-Cap outputwires to earth 200 pF
Cable-Cap outputwires mutual 200 pF
Conn.type input terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Conn.type output terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Max. cable length Hot Wires 0.75m
Striplength 8.0-9 mm
Dual fixture Master/Slave Not applicable [Master/Slave oper. not applicable]
Wcs Input terminals 0.50-1mm²
Wcs Output terminals 0.50-1mm²

Rated Lamp Power on TL-D 36W
System Power on TL-D 36W
Lamp Power on TL-D 32.5W
Power Loss on TL-D 3.5W

T-case life 80 C
T-case maximum 80 (max) °C
T-ignition -25 (min), 60 (max) °C
T-ambient -25 (min), 60 (max) °C
T-storage -40 (min), 50 (max) °C

Bal lm Fac Emergency operation 0.7 -
Light output after 5 sec 50% of EBLF
Light output after 60 sec 100% of EBLF
Normal operating voltage (DC) 220-240V
Batt volt guaranteed ignition 186-275V
Batt volt guaranteed operation 176-275V

Length A1 280 mm
Fixing Hole Distance Length A2 265 mm
Width B1 30 mm
Height C1 28 mm
Fixing Hole Diameter D1 4.2 mm

Approval marks ENEC / VDE-EMV
CE marking Yes
Temperature marking 110 [Yes]
Emergency standard IEC 60598-2-22

An energy-efficient solution
-The programmed start enables the lamp to be switched on and off without reducing useful lamp life.
-DC emergency operation in line with IEC/EN 60598-2-22 luminaire norms
-Smart power ensures constant light, irrespective of mains-voltage fluctuations
-Suitable for luminaires in protection class I and, after testing, class II
-The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring.

Features
-Robust design for 100000 hours lifetime at Ta=50˚C and over 100000 on/off switching operations on one lamp
-Programmed, flicker-free, pre-heated start (< 0.5s) which allows the lamp to be switched on and off without reducing useful lamp life
-Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations
-The unit is protected against excessive mains voltage and incorrect connections.

Applications
-Used with movement-detection control systems like Philips OccuPlus
-Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools
-Class I outdoor applications, e.g. industrial premises and parking lots