T8 sets of fluorescent lamps

Philips Master TL-D 37 58W 865 G13 Power Saver Set

915129 | Manufacturer: Philips | EAN: 8727900915129 | MPN: 927997286502

9,85 €tax excl.

Price for 1 piece, excluding shipping costs!
Condition: New product
Factory Box - pieces: 25
By buying this product you can collect up to 9 loyalty points.
Your cart will total 9 points, that can be converted into a voucher of 0,18 €.


More info

More info

The MASTER TL-D Power Saver Set is a perfect solution for upgrading your existing lighting installation with a special TL-D lamp with an intelligent starter. It offers considerable energy savings while maintaining the same lighting level and a better light quality. The MASTER TL-D Power Saver Set is easy to install, simply by changing the lamp and the starter. The benefits are huge in all current installations with TL-D lamps.

Cap-Base G13 [Medium Bi-Pin Fluorescent]
Bulb T8 [26 mm]
Life System to 10% failures 15000 h
Life System to 50% failures 20000 h
SSF EM 2000 h Rated,3h cycle 100%
SSF EM 4000 h Rated,3h cycle 99%
SSF EM 6000 h Rated,3h cycle 98%
Color Code 865 [CCT of 6500 K]
Color Rendering Index 82 Ra8
Color Designation Cool Daylight
Color Temperature 6500 K
Syst Lum Flux 25 °C, Nom,@10kh 3215 lm
SystLum Flux 25 °C, Rated,@10kh 3215 lm
SLMF EM 2000 h Rated 96%
SLMF EM 4000 h Rated 94%
SLMF EM 6000 h Rated 94%
Chromaticity Coordinate X 313 -
Chromaticity Coordinate Y 338 -
System Wattage 48 W
System Wattage EM 25 °C, Nom 48 W
System Wattage EM 25 °C, Rated 48 W
Dimmable No
Energy Efficiency Label (EEL)A
Mercury (Hg) Content 2 mg
Energy consumption kWh/1000 h 43 kWh
Base Face to Base Face A 1500 (max) mm
Insertion Length B 1504.7 (min), 1507.1 (max) mm
Overall Length C 1514.2 (max) mm
Diameter D 28 (max) mm

• Up to 30% energy saving, while maintaining the lighting level compared to a TL-D Standard colors lamps (halophosphate), is achieved by an intelligent electronic starter in combination with the most efficient fluorescent TL-D lamp
• Designed for operation on electromagnetic gear only
• Full thermal safety monitoring which cuts off defective or end-of-life lamps
• Instant flicker-free ignition (nom. 2seconds)
• Can be ignited from –15 to +50 °C
• Product range is RoHS-compliant
• Product range is covered by WEEE

• Suitable to replace TL-D Standard colors lamps (halophosphate) in all existing TL-D luminaires with electromagnetic gear (220 - 240 V, 50 Hz). Use on 60 Hz and/or 110 V systems leads to non-functionality of the system.
• Can also be used to replace MASTER TL-D Super 80 lamps, but the light output of the total installation will then be reduced by approximately 20%.

It needs ballastYes
DimmableYes, with DIMM ECG
Energy Efficiency ClassA
Wattage - Watt (W)58
Luminous flux - Lumen (lm)3215
Luminous Efficacy Lamp - (lm / W)55
Light color temperature - Kelvin (K)6500
Light color code865
Color rendering index - CRI82
Energy consumption - (kWh / 1000h)58
Lifetime - hours (h)20000
Factory Box - pieces25

General safety informations



Are you interested in more information about this product?

Question about the product

* Required fields



Write your own review


Shopping cart

No products

Add to compare

    There are no products selected for comparison.