Osram Optotronic OT 75/220V 24V E IP64 Led

Output power 75 W
Input voltage 198…254 V
Mains frequency 50 - 60 Hz
Output voltage 24 V
ECG efficiency 89%
Nominal voltage 220 - 240 V
Nominal current 0.38 A
Device power loss 8.5 W
Power factor λ N/A
Inrush current 41 A
Galvanic isolation primary/secondary 3.75 kV
Surge capability (L/N-Ground) 3 kV
Length 241 mm
Width 43 mm
Height 30 mm
Cable cross-section, input side 0.83 mm²
Cable cross-section, output side 2.1 mm²
Wire preparation length, input side 10 mm

Casing material Metal
Ambient temperature range –20…+60 °C
Maximum temperature at tc test point 85 °C
Max.housing temperature in case of fault 110 °C
ECG lifetime 50000 h
Dimmable No
Suitable for fixtures with prot. class I
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Type of protection IP64
Standards acc. to IEC 61347/acc. to IEC 60598/acc. to IEC 62384/acc. to EN 55015: 2006 + A1: 2007/acc. to EN 61000 - 3-2/acc. to EN 61547
Approval marks - approval CE / ENEC 18 / VDE / VDE-EMC / GHOST / C-Tick

Benefits
• Very high efficiency and reliability
• Versatile scope of application due to output power range of up to 240 W
• Constant luminous flux for very low and high temperatures due to Smart Power Supply

Areas of application
• Suitable for indoor and outdoor SELV installations
• Suitable for use in tight, flat luminaires or installation in suspended ceilings
• Outdoor applications only in suitable luminaires

Dimmable	Yes
Voltage - Volt (V)	220
Wattage - Watt (W)	75
Energy consumption - (kWh / 1000h)	75
International Protection Marking - (IPXX)	64
Lifetime - hours (h)	50000
Factory Box - pieces (pcs)	10

General safety informations