981677 | Manufacturer: Osram | EAN: 4008321981677 | MPN: OT-80-220-240-24-P-DIM

Optotronic OT 80 220V 24V DIM IP67 LED power supply supplies drivers


Product is out of production!

Optotronic OT 80 220V 24V DIM P IP67 LED LED Power Supplies and LED DriversNominal voltage: 220 - 240 V Input voltage: AC 198 - 264 V Output voltage: 24 V Output power: 80 W Dimmable: Yes, via isolated interface (1-10 V) Protection features: Overheating, overload, short-circuit protection IP rating: IP67 for high protection against dust and water ingressBenefits: - Versatile driver with flexible output characteristics up to 240 W - High efficiency and reliability - Surge protection up to 3 kV (L-N) /6 kV (L/N-PE)Areas of application: - Suitable for tight luminaires or suspended ceilings - Indoor and outdoor SELV installations
    More info

    More info

    Osram Optotronic OT 80 220V 24V DIM IP67 LED power supply supplies drivers P. Illuminate your space with the Optotronic OT 80 LED Power Supply. Reliable, waterproof, and energy-efficient for all lighting needs.

    Nominal voltage 220 - 240 V
    Mains frequency 50 - 60 Hz
    Input voltage AC 198 - 264 V
    Power factor λ 0.90/0.95
    ECG efficiency 87%
    Device power loss 12 W
    Power loss in stand-by mode < 1.5w Inrush current 35 A
    Max. ECG no. on circuit breaker 10 A (B) 7
    Max. ECG no. on circuit breaker 16 A (B) 10
    Surge capability (L-N) 3 kV
    Nominal output voltage 24 V
    Nominal output power 80 W
    Galvanic isolation primary/secondary 3.75 kV
    Length 250 mm
    Width 50 mm
    Height 34 mm
    Mounting hole spacing, width 14 mm
    Cable cross-section, input side 1 mm²
    Cable cross-section, output side 1.5 mm²
    Wire preparation length, input side 10…11 mm
    Wire preparation length, output side 10…11 mm
    Casing material Metal
    Ambient temperature range –25…+55 °C
    Maximum temperature at tc test point 80 °C
    Max.housing temperature in case of fault 100 °C
    Temperature range at storage –40…85 °C
    ECG lifetime 50000 h
    Dimmable Yes
    Dimming interface 1…10 V
    Dimming range 1…100%
    Overheating protection Automatic reversible
    Overload protection Automatic reversible
    Short-circuit protection Automatic reversible
    No-load proof Yes
    Max. cable length to lamp/Led module 10m
    Suitable for fixtures with prot. class II
    Approval marks - approval CE / CB / C-Tick
    Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000 - 3-2/Acc. to IEC 61000 - 3-3/Acc. to IEC 61547
    Type of protection IP67
    Temperature range at storage –40…85 °C
    Relative humidity 5…85%

    Benefits
    • Versatile 1-10 V wide-range driver up to 240 W due to flexible output characteristics
    • Very high efficiency and reliability
    • High IP protection (IP67)
    • High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)

    Areas of application
    • Suitable for use in tight, flat luminaires or installation in suspended ceilings
    • Suitable for indoor and outdoor SELV installations

    Features
    • Dimmable via fully isolated 1…10 V interface
    • Driver with output power range of up to 240 W

    Explanation Dimmable yes
    Explanation Outdoor use yes
    Explanation Voltage - (V) 220
    Explanation Wattage - (W) 80
    Explanation Energy consumption - (kWh / 1000h) 80
    Explanation Protection mark - (IPXX) 67
    Explanation Lifetime - (h) 50000
    Explanation Factory packed - (pieces) 10

    General safety informations

    Add to compare

      There are no products selected for comparison.