QTP 1x10 13W 220V electronic ballasts

Illuminate your space with the QTP d e 1x10 13W 220V electronic ballast. Efficiently power lighting for a brighter environment.

Nominal voltage 220 - 240 V
Mains frequency 50 - 60 Hz
DC voltage 176 - 276 V
Operating frequency 44 kHz
Max. no. of ECGs on circuit breaker 10 A 25
Max. no. of ECGs on circuit breaker 16 A 41
Starting time 1s
Length 93 mm
Width 58 mm
Height 29 mm
Mounting hole spacing, length 96 mm
Mounting hole spacing, width 48 mm
Ambient temperature range –20…+50 °C
Optional cable clamp, see chapter ECG mountings - cable clamp
Dimmable No
Suitable for fixtures with prot. class I / II
End of lamp life safety shutdown EOL T.2
Approval marks - approval VDE / VDE-EMC
EEI - Energy Label A3
Standards acc. to EN 61347-2-3/acc. to EN 60929/acc. to EN 55015: 2006 + A1: 2007/acc. to EN 61000 - 3-2/acc. to EN 61547

Benefits
• Long lamp life
• No adverse effect from frequent on/off switching
• Automatic restart after lamp replacement
• Perfect lamp start for applications with motion sensors
• Separate installations thanks to optional cable clamp for K2 and K3 casings
• VDE/VDE EMC certified system

Areas of application
• Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100
• Public buildings
• Sports halls and factories
• Suitable for luminaires of protection class I

Features
• Supply voltage: 220 - 240 V
• Line voltage: 198 - 264 V
• Line frequency: 0 Hz| 50 Hz | 60 Hz
• Lamp start with optimum filament preheating
• Energy Efficiency Index EEI: A2
• Automatic shutdown of defective lamps and at end of life (EoL T.2)
• Lamp operation: to EN 60929
• Safety: to EN 61347-2-3

General safety informations