HID PV 150 220V CDM electronic ballasts for

Philips HID PV 150 220V CDM electronic ballasts for Ballast C I. Enhance your lighting with HID PV C 150 I 220V CDM electronic ballast. Boost brightness and efficiency for a brighter space.

Rated Lamptype CDM
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 150
Line Voltage 220 - 240 V
Line Frequency 50 - 60 Hz
Housing /I
Suitable for Outdoor use No

Automatic restart Yes
Ignition switch-off time 20 min
Ignition Voltage 5 (max)kV
Operating frequency 0.14 kHz
Mains voltage safety (AC) -18% /+10%
Mains voltage performance (AC) -10% /+6%
Inrush current Peak 50 (max) A
Inrush current Width 0.50m s
Earth leakage current 0.35 (max) mA
Power losses gear 10 W
Constant wattage deviation -3% /+3%
PowerFactor 100% output power 0.95 -
Overvoltage protection 320 V 48 hr
Max ballast on MCB(16 A type B) 6 ×
Hum and Noise level Inaudible

Cable-Cap outputwires mutual 200 pF
Connector type Insert
Max. cable length Device/Lamp 2.0m
Striplength 10 - 11 mm
Wcs Ballast contacts 0.75-2.50 mm²
Active temperature protection Yes
F-marking Yes
T-case life 70 C
T-case maximum 80 (max) °C
T-ambient –20 (min), 45 (max) °C
T-storage -25 (min), 80 (max) °C
Length A1 223.9 mm
Fixing Hole Distance Length A2 206 mm
Width B1 82.7 mm
Height C1 34.2 mm
Fixing Hole Diameter D1 4.8 mm

PrimaVision Power (100 W and 150W) for CDM - High power packed in a small size
• Optimal lamp performance thanks to minimal lamp power tolerance
• Lamp life increased by up to 30% for CDM lamps
• Eliminates all visible lamp flicker

Features
• Loop Through feature (in independent version)
• Low gear energy losses
• Lamp end-of-life detection
• High Tambient and Tcase temperatures
• Long lifetime of 40000 hours

Applications
• 100 and 150W: high-bay area, accent and decorative lighting for shops, public spaces, lobbies and offices
• Suitable for indoor use only

General safety informations