DALI dimmable electronic ballasts qti 2x18 42W 220V DIM quicktronic

Osram DALI dimmable electronic ballasts qti 2x18 42W 220V DIM quicktronic Ballast Intelligent Control. Enhance your lighting control with the DALI Dimmable Electronic Ballast. Experience intelligent dimming capabilities for optimal illumination.

Nominal voltage 220 - 240 V
Mains frequency 50 - 60 Hz
DC voltage 154…276 V
Operating frequency 42…140 kHz
Max. no. of ECGs on circuit breaker 10 A 8
Max. no. of ECGs on circuit breaker 16 A 13
Starting time 0.6 s
Length 123 mm
Width 79 mm
Height 33 mm
Mounting hole spacing, length 129.5 mm
Mounting hole spacing, width 67 mm
Cable cross-section, input side 0.5-1.5 mm²
Ambient temperature range –10…+50 °C
Optional cable clamp, see chapter ECG mountings - cable clamp
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range 3…100%
Dimmable Yes
Overheating protection Yes
Suitable for fixtures with prot. class I
End of lamp life safety shutdown EOL T.2
Approval marks - approval VDE / E1 approval / VDE-EMC
EEI - Energy Label A1 BAT
Standards acc. to EN 61347-2-3/acc. to EN 60929/acc. to EN 55015: 2006 + A1: 2007/acc. to EN 61000 - 3-2/acc. to EN 61547

Benefits
• Easy change of defect ECG thanks to available System+ Guarantee
• Easy integration in luminaire thanks to same dimensions like DALI GI ECG
DALI product features
• Control via the DALI interface
• Compliance with the DALI standard to IEC 60929 and IEC 62386
• Control input protected against overvoltage and polarity reversal (Osram ECG)
Touch DIM and Touch DIM Sensor function
• Manual dimming without any controller and with standard switches
• Including memory function (double click) and soft start

Applications
• Suitable for emergency light installations

Features
• Corridor function for direct connection of ECG to common motion sensor
• Corridor function with pre-programmed light program
• TouchDIM function for free parameterization of light value and turn on time
• Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
• Fit for Emergency function for automatic detection of emergency lighting by ECG
• Very low standby power consumption: < 0.2 W (A1 BAT)
• Lifetime: up to 100000 h (temperature at Tc = 65 °C, max. 10% failure rate)
• Very high number of switching cycles: up to 300000
• Dimming range: 1…100% (3…100% with compact fluorescent lamp)
• POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime
• Line frequency: 0 Hz, 50 Hz…60 Hz, rectified

General safety informations