Economic Led tube for electromagnetic control gears. Cost-optimized lighting jobs, the completely reworked Osram SubstiTUBE Value T8 serves better than ever before as an economic alternative to conventional fluorescent lamps.
Rated wattage 19.10 W Nominal voltage 220 - 240 V Operating frequency 50 - 60 Hz Nominal wattage 19.10 W Nominal current 0.088 A Type of current AC Power factor λ > 0.90 Rated color temperature 4000 K Nominal luminous flux 2000 lm Rated luminous flux 2000 lm Lumen main.fact.at end of nom.life time 0.70 Light color (designation) Cool White Color temperature 4000 K Luminous flux 2000 lm Color rendering index Ra≥80 Standard deviation of color matching ≤6 sdcm Starting time < 0.5s Warm-up time (60%) < 0.5s Rated beam angle (half peak value) 190° Length with base excl. base pins/connection 1500 mm Tube diameter 25.6 mm Base diameter 26.7 mm Product weight 260 g Overall length 1513 mm Ambient temperature range –20…+45 °C Lifespan 30000 h Nominal lamp life time 30000 h Rated lamp life time 30000 h Number of switching cycles 200000 Base (standard designation) G13 Mercury-free Yes Dimmable No Type of protection IP20 Standards CE/CB Energy efficiency class A+ Energy consumption 20 kWh/1000 h
Benefits • No bending thanks to glass technology • Quick, simple and safe replacement without rewiring • Energy savings of up to 65% (compared to T8 fluorescent lamp on CCG) • Instant-on light, therefore ideally suitable in combination with sensor technology • Very high resistance to switching loads • Also suitable for operation at low temperatures
Applications • General illumination within ambient temperatures from –20…+45 °C • Corridors, stairways, parking garages • Cooling and storage rooms • Domestic applications • Industry • Warehouses • Supermarkets and department stores
Features • Led alternative to classic T8 fluorescent lamps in CCG luminaires • Uniform illumination • Mercury-free and RoHS compliant • Luminous efficacy: up to 105 lm/W • Tube made of glass
Equipment / Accessories • Suitable for operation with low-loss and conventional control gears
SAFETY ADVICE Not suitable for operation with electronic control gear. Operation in outdoor applications in suitable damp-proof luminaires possible according to data sheet and installation instruction.
Legal advice When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system.
Energy Efficiency Class
Voltage - Volt (V)
Wattage - Watt (W)
Luminous flux - Lumen (lm)
Luminous Efficacy Lamp - (lm / W)
Light color temperature - Kelvin (K)
Light color code
Color rendering index - CRI
Energy consumption - (kWh / 1000h)
International Protection Marking - (IPXX)
Lifetime - hours (h)
Factory Box - pieces
Are you uncertain about which lamp technology (EM or HF lamps) you need for your luminaire? Our insider tip offers you two ways of easily finding this out.