Nominal wattage 30W
Nominal voltage 10V
Test voltage 10.5V
Nominal luminous flux 400 lm
Diameter 36 mm
Overall length 67 mm
Light center length (LCL) 31 mm
Base (standard designation) BA20s
Burning position s135
Product benefits
-Much higher luminous efficacy than high-voltage signal lamps
-Clearly improved lamp quality due to higher gas pressure and inert gas filling
-Leads to reduced power consumption of the signal installation
-High resistance against shock and vibration compared to high-voltage lamps
-Max. premature failure rate: 2% up to 4400h (related to lamp failures only)
-Retrofit for 230V systems (replace lamp and reflector and install transformator)
Areas of application
-Road traffic signalling systems
Safety advice
Use only in equipment/luminaires that are specially designed for the purpose.
Protect the lamps against moisture during operation and installation.
Data sheet: Traffic signal lamps SIG 1238 30W 10V BA20s
Dimmable | No |
Base/Sockel | BA20s |
Voltage - Volt (V) | 10 |
Wattage - Watt (W) | 30 |
Luminous flux - Lumen (lm) | 400 |
Luminous Efficacy Lamp - (lm / W) | 13 |
Energy consumption - (kWh / 1000h) | 30 |
Factory Box - pieces (pcs) | 10 |