Optotronic OT 200V 240V 24V CE IP65 LED power supply supplies drivers

Osram Optotronic OT 200V 240V 24V CE IP65 LED power supply supplies drivers 6. Illuminate your space with the Optotronic OT 6 LED Power Supply. Reliable, efficient, and CE certified for peace of mind. Perfect all lighting needs.

Output power 6 W
Input voltage 180…254 V
Mains frequency 50 - 60 Hz
Output voltage 24 V
ECG efficiency 80%
Nominal voltage 200…240 V
Nominal current 0.08 A
Device power loss 1.5 W
Power factor λ N/A
Inrush current 15 A
Max. no. of ECGs on circuit breaker 10 A 30
Max. no. of ECGs on circuit breaker 16 A 48
Galvanic isolation primary/secondary 3 kV
Surge capability (L-N) 1 kV
Length 51 mm
Width 50 mm
Height 22 mm
Cable cross-section, input side 1 mm²
Cable cross-section, output side 1 mm²
Wire preparation length, input side 10 mm
Casing material Plastic
Ambient temperature range –20…+50 °C
Maximum temperature at tc test point 70 °C
Max.housing temperature in case of fault 100 °C
ECG lifetime 50000 h
Dimmable Yes (With OPTOTRONIC dimmers)
Suitable for fixtures with prot. class II
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Maximum wiring length ECG/lamp 10m
Type of protection IP65
Standards acc. to IEC 61347-2-13/acc. to IEC 62384/acc. to EN 55015/acc. to IEC 61000 - 3-2/acc. to IEC 61000 - 3-3/acc. to IEC 61547
Approval marks - approval CE / VDE / ENEC 10

Benefits
• Very high efficiency and reliability
• Versatile scope of application due to output power range of up to 240 W
• Constant luminous flux for very low and high temperatures due to Smart Power Supply

Applications
• Suitable for indoor and outdoor SELV installations
• Suitable for use in tight, flat luminaires or installation in suspended ceilings
• Outdoor applications only in suitable luminaires

General safety informations