HF P 170 TL-D EII 220V

Application code EII
Rated Lamptype TL-D
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 70 W
Line Voltage 220 - 240 V
Line Frequency 50 - 60 Hz
Housing L 280 × 30 × 28
Energy Efficiency Index A2 BAT
Lifetime 90% surv.@Tcaselife 50000 h
Ignition Method Warm Start
Automatic restart Yes
Ignition time 0.55 (max) s
Operating frequency 42 (min), 45 (nom) kHz
Mains voltage safety (AC) –10% /+10%
Mains voltage performance (AC) -8% /+6%
Inrush current Peak 18 (max)A
Inrush current Width 0.25 ms
Earth leakage current 0.5 mA
Power losses gear 7.8 W
Constant wattage deviation -2% /+2%
Ballast Lumen Factor 0.95 -
PowerFactor 100% output power 0.99 -
Battery voltage lamp ignition 196-254 V
Battery voltage running lamps 176-254 V
Overvoltage protection 320 V 48 hr
Overvoltage protection 350 V 2 hr
Crestfactor 1.7 (max) -
Hum and Noise level Inaudible
Cable-Cap outputwires to earth 200 pF
Cable-Cap outputwires mutual 200 pF
Conn.type input terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Conn.type output terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Max. cable length Hot Wires 0.75 m
Striplength 8.0-9 mm
Dual fixture Master/Slave Not applicable [Master/Slave oper. not applicable]
Wcs Input terminals 0.50 - 1.50 mm²
Wcs Output terminals 0.50 - 1.50 mm²
Rated Lamp Power on TL-D 70 W
System Power on TL-D 67.8 W
Lamp Power on TL-D 60 W
Power Loss on TL-D 7.8 W
T-case life 75 C
T-case maximum 75 (max) °C
T-ignition -25 (min), 50 (max) °C
T-ambient -25 (min), 50 (max) °C
T-storage -40 (min), 80 (max) °C
Length A1 280 mm
Fixing Hole Distance Length A2 265 mm
Width B1 30 mm
Height C1 28 mm
Fixing Hole Diameter D1 4.2 mm
Approval marks ENEC / VDE-EMV
CE marking Yes
Temperature marking 110 [Yes]
Emergency standard IEC 60598-2-22

Benefits
• An energy-efficient solution
• High CELMA Energy Efficiency Index A2
• The programmed start enables the lamp to be switched on and off more than 50000 times without reducing useful lamp life
• Suitable for luminaires in protection class I and, after testing, class II

Features
• Programmed start: flicker-free, warm start circuit preheats (0.5s) the lamp electrodes; lamps can be switched on and off without reducing useful life
• Smart power: constant light independent of mains voltage fluctuations
• Unit is protected against excessive mains voltages and incorrect connections
• Automatic stop circuit is activated within 5 seconds in case of lamp failure (safety stop); ballast resets automatically after lamp replacement
• Universal connector for both manual and automatic wiring

Applications
• Suitable for operation with movement-detection control systems like Philips OccuPlus
• Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools
• Maximum reliability in system operation

General safety informations