0933659 | Manufacturer: Philips | EAN: 8727900933659 | MPN: 913700665166

HID PV 50 220V CDM electronic ballasts for


Product is out of production!

The HID PV C 50 I 220V CDM is a high-quality and robust ballast that ensures optimal lamp performance. With minimal lamp power tolerance, it increases the lifespan of CDM lamps by up to 30% and eliminates visible flickering. This ballast also features low gear energy losses, end-of-life detection, and can withstand high ambient and case temperatures. Perfect for accent and decorative lighting in shops, public spaces, lobbies, and offices. Suitable for indoor use only.

    More info

    More info

    Enhance your lighting with HID PV C 50 I 220V CDM electronic ballast. Achieve optimal brightness and efficiency for space.

    Rated Lamptype CDM
    Rated Number of Lamps 1 piece
    Rated Ballast-Lamp Power 50
    Line Voltage 220 - 240 V
    Line Frequency 50 - 60 Hz
    Housing /I
    IP Classification 20
    Suitable for Outdoor use No
    Lifetime 90% surv.@Tcaselife 40000 h
    Automatic restart Yes
    Ignition switch-off time 18 min
    Ignition Voltage 4 (max)kV
    Operating frequency 0.14 kHz
    Mains voltage safety (AC) -18% /+10%
    Mains voltage performance (AC) –10% /+6%
    Inrush current Peak 26 (max) A
    Inrush current Width 0.25ms
    Earth leakage current 0.25 (max) mA
    Power losses gear 6 W
    Constant wattage deviation -3% /+3%
    PowerFactor 100% output power 0.95 -
    Overvoltage protection 320 V 48 hr
    Max ballast on MCB(16 A type B) 24 ×
    Hum and Noise level 37 dB(A)
    Cable-Cap outputwires mutual 150 pF
    Connector type Insert
    Max. cable length Device/Lamp 2.0m
    Striplength 10 - 11 mm
    Wcs Ballast contacts 0.50-2.50 mm²
    Active temperature protection Yes
    T-case life 75 C
    T-case maximum 75 (max) °C
    T-ambient –20 (min), 50 (max) °C
    T-storage -25 (min), 75 (max) °C
    Length A1 188 mm
    Fixing Hole Distance Length A2 170 mm
    Width B1 82.7 mm
    Height C1 34.5 mm
    Fixing Hole Diameter D1 4.8 mm
    High quality and robust performance
    • Optimal lamp performance thanks to minimal lamp power tolerance
    • CDM lamp life increased by up to 30%
    • Eliminates all visible lamp flicker

    Features
    • Minimal lamp power spread
    • Low gear energy losses
    • Lamp end-of-life detection
    • High Tambient and Tcase temperatures
    • Long lifetime of 40000 hours

    Applications
    • Accent and decorative lighting for shops, public spaces, lobbies and offices
    • Suitable for indoor use only

    Dimmableno
    Voltage - (V)220
    Wattage - (W)50
    Energy consumption - (kWh / 1000h)50
    Lifetime - (h)40000
    Factory packed - (pieces)12

    General safety informations

    Shopping cart

    No products

    Add to compare

      There are no products selected for comparison.