HID PV 35 220V CDM electronic ballasts for

Enhance your lighting with HID PV C 35 G 220V CDM electronic ballast. Boost efficiency and brightness for a brighter space.

Rated Lamptype CDM
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 35
Line Voltage 220 - 240 V
Line Frequency 50 - 60 Hz
Housing /G
Suitable for Outdoor use No
Lifetime 90% surv.@Tcaselife 40000 h
Automatic restart Yes
Ignition switch-off time 18 min
Ignition Voltage 4 (max)kV
Operating frequency 0.14 kHz
Mains voltage safety (AC) -18% /+10%
Mains voltage performance (AC) -10% /+6%
Inrush current Peak 26 (max) A
Inrush current Width 0.25ms
Earth leakage current 0.25 (max) mA
Power losses gear 4.5 W
Constant wattage deviation -3% /+3%
PowerFactor 100% output power 0.95 -
Overvoltage protection 320 V 48 hr
Max ballast on MCB(16 A type B) 24 ×
Hum and Noise level 37 dB(A)
Cable-Cap outputwires mutual 150 pF
Connector type Wieland
Max. cable length Device/Lamp 2.0m
Striplength 10 - 11 mm
Wcs Ballast contacts 0.50-2.50 mm²
Active temperature protection Yes
T-case life 75 C
T-case maximum 75 (max) °C
T-ambient –20 (min), 50 (max) °C
T-storage -25 (min), 75 (max) °C
Length A1 188 mm
Fixing Hole Distance Length A2 170 mm
Width B1 82.7 mm
Height C1 34.5 mm
Fixing Hole Diameter D1 4.8 mm

High quality and robust performance
• Optimal lamp performance thanks to minimal lamp power tolerance
• CDM lamp life increased by up to 30%
• Eliminates all visible lamp flicker

Features
• Minimal lamp power spread
• Low gear energy losses
• Lamp end-of-life detection
• High Tambient and Tcase temperatures
• Long lifetime of 40000 hours

Applications
• Accent and decorative lighting for shops, public spaces, lobbies and offices
• Suitable for indoor use only

General safety informations