Philips HID PV E 70/S 220V CDM

Rated Lamptype CDM
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 70
Line Voltage 220-240V
Line Frequency 50/60Hz
Housing /S
Lifetime 90% surv.@Tcaselife 30000h
Automatic restart Yes
Ignition type Pulse
Ignition Voltage 3.0 (min), 5.0 (max)kV
Operating frequency * 45-66 kHz
Mains voltage safety (AC) 180-264V
Mains voltage performance (AC) -8% /+6%
Min. Mains voltage operational 180 (min) V
Inrush current Peak 33 (max) A
Inrush current Width 0.33ms
Power losses gear 7W
PowerFactor 100% output power 0.95 -
Overvoltage protection 320Vac 48 hr
Overvoltage protection 350Vac 2 hr
Max ballast on MCB(16A type B) 24 x
Hum and Noise level 37 dB(A)
Cable-Cap outputwires mutual 120 pF
Connector type Insert
Max. cable length Device/Lamp 2 m
Wcs Ballast contacts 0.50-1.50mm²
Active temperature protection No
F-marking No
T-case life 80 C
T-case maximum 80 (max) °C
T-ambient -20 (min), 50 (max) °C
T-storage -25 (min), 80 (max) °C
Length A1 109.6 mm
Fixing Hole Distance Length A2 98.5 mm
Width B1 74.4 mm
Height C1 32.2 mm
Fixing Hole Diameter D1 4.9 mm

PrimaVision Economy (35, 50 and 70W) for CDM - The cost-effective solution
- Cost-effective, plus design flexibility
- Optimal lamp performance thanks to minimal lamp power tolerance
- Lamp life increased by up to 30% for CDM lamps

Features
- Minimal lamp power spread
- Low gear energy losses
- Lamp end-of-life detection
- High Tambient and Tcase temperatures
- Lifetime of 30000 hours

Applications
- 35, 50 and 70W: accent and decorative lighting for shops, public spaces, lobbies and offices
- Suitable for indoor use only
- Available in standard (S) and independent (I) versions

Dimmable	No
Voltage - Volt (V)	220
Wattage - Watt (W)	70
Energy consumption - (kWh / 1000h)	70
Lifetime - hours (h)	30000
Factory Box - pieces (pcs)	10

General safety informations