HID PV 35 220V CDM electronic ballasts

Philips HID PV 35 220V CDM electronic ballasts C S Ballast. Enhance your lighting with HID PV C 35 S 220V CDM electronic ballast. Achieve optimal brightness and efficiency for space.

Rated Lamptype CDM
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 35
Line Voltage 220 - 240 V
Line Frequency 50 - 60 Hz
Housing /S
Suitable for Outdoor use No
Lifetime 90% surv.@Tcaselife 40000 h
Automatic restart Yes
Ignition switch-off time 18 min
Ignition Voltage 4 (max)kV
Operating frequency 0.14 kHz
Mains voltage safety (AC) -18% /+10%
Mains voltage performance (AC) -10% /+6%
Inrush current Peak 26 (max) A
Inrush current Width 0.25ms
Power losses gear 4.5 W
Constant wattage deviation -3% /+3%
PowerFactor 100% output power 0.95 -
Overvoltage protection 320 V 48 hr
Max ballast on MCB(16 A type B) 24 ×
Hum and Noise level 37 dB(A)
Cable-Cap outputwires mutual 100 pF
Connector type Insert
Max. cable length Device/Lamp 1.5m
Wcs Ballast contacts 0.50-2.50 mm²
Active temperature protection Yes
T-case life 80 C
T-case maximum 80 (max) °C
T-ambient –20 (min), 55 (max) °C
T-storage -25 (min), 80 (max) °C
Length A1 109.6 mm
Fixing Hole Distance Length A2 98.5 mm
Width B1 74.4 mm
Fixing Hole Distance Width B2 63.7 mm
Height C1 32.2 mm
Fixing Hole Diameter D1 4.9 mm

High-quality, compact and lightweight HID electronic gear for optimal and reliable performance of 20, 35, 50 and 70 W CDM lamps.

Features
• Minimal lamp power spread
• Low gear energy losses
• Lamp end-of-life detection
• High Tambient and Tcase temperatures
• Long lifetime of 40000 hours

Applications
• Accent and decorative lighting for shops, public spaces, lobbies and offices
• Suitable for indoor use only

General safety informations