HF pi 14 21 24 39 TL5 EII 220V elektronska predstikalna naprava

Nadgradite svojo razsvetljavo z elektronsko predstikalno napravo HF Pi 1 za sijalke TL5. Ta 220-voltna predstikalna naprava je učinkovita in zanesljiva ter zagotavlja optimalno delovanje.

Application code EII
Rated Lamptype TL5
Rated Number of Lamps 1
Rated Ballast-Lamp Power 14-39
Line Voltage 220 - 240 V
Line Frequency 50 - 60 Hz
Housing L 360 × 30 × 22
Energy Efficiency Index A2 BAT
Lifetime 90% surv.@Tcaselife 50000 h
Ignition Method Warm Start
Automatic restart Yes
Ignition time 5 (max) s
Mains voltage safety (AC) –10% /+10%
Mains voltage performance (AC) -8% /+6%
Inrush current Peak 20 (max) A
Inrush current Width 0.35ms
Earth leakage current 0.5 (max) mA
Power losses gear 1.9-2.5 W
Constant wattage deviation -2% /+2%
Ballast Lumen Factor 1
Battery voltage running lamps 198-276
Max ballast on MCB(16 A type B) 12 ×
Crestfactor 1.7 (max) -
Hum and Noise level Inaudible
Cable-Cap outputwires to earth 70 pF
Cable-Cap outputwires mutual 70 pF
Conn.type input terminals Insert
Conn.type output terminals Insert
Max. cable length Device/Lamp 2 m
Max. cable length Hot Wires 0.75m
Striplength 8.0-9 mm
Wcs Input terminals 0.50 - 1 mm²
Wcs Output terminals 0.50 - 1 mm²
Power Loss on TL5 HO 2.2/2.4
Lamp Power on TL5 HO 24.3/37.5
System Power on TL5 HO 26.5/39.9
Rated Lamp Power on TL5 HO 24/39 W
Rated Lamp Power on TL5 HE 14/21 W
System Power on TL5 HE 16.6/23.6 W
Lamp Power on TL5 HE 14.7/212 W
Power Loss on TL5 HE 1.9/2.4 W
T-case life 75 C
T-case maximum 75 (max) °C
T-ignition -25 (min), 50 (max) °C
T-ambient -25 (min), 50 (max) °C
T-storage -25 (min), 80 (max) °C
Length A1 360 mm
Fixing Hole Distance Length A2 350 mm
Width B1 30 mm
Height C1 22 mm
Fixing Hole Diameter D1 4.2 mm
Approval marks ENEC / VDE-EMV
CE marking Yes
Temperature marking [Yes]
Emergency standard IEC 60598-2-22
For flexibility in luminaire design
• HF-Pi offers the flexibility of a simplified product portfolio. TL5 HO/HE lamps can be exchanged, reducing the cost of logistics throughout the value chain
• Suitable for luminaires in protection class I and, after testing, class II. Also suitable for emergency lighting luminaires in accordance with IEC/EN 60598-2-22 and VDE 0108
• The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring

Features
• Unique “intelligent” technology, automatic lamp recognition
• Robust design for 100000 hours lifetime at Ta=50˚C and over 100000 on/off switching operations on one lamp
• Protected against excessive mains voltage and incorrect connections up to 400 V AC
• Programmed, flicker-free, pre-heated start (< 1s) which allows the lamp to be switched on and off without reducing useful lamp life
• Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations

Applications
• Ideal for applications where a high level of energy efficiency and switching is required:
• Used with movement-detection control systems like Philips OccuPlus
• Indoor applications such as office buildings, hospitals, supermarkets, department stores and schools
• In class I outdoor applications, e.g. industrial premises and parking lots

Varnostna navodila