Philips 20 x TUV 335W xpt se G5.4x17q

Cap-Base G5.4x17q
Execution SE
Operating Position p10
Main Application Disinfection

Lamp Wattage 335W
Lamp Wattage Technical 230W
Lamp Current 3.06A
Dimmable No

Pinch Temperature 95 C
Bulb Temperature 144 C

Overall Length C 1514 (max) mm
Diameter D 32 mm
Arc Length O 1400 mm

TUV Dynapower system- Extreme reliability
-Extreme reliability of driver; with annual failure rate of less than 1%
-Easier to maintain compliance with regulations thanks to reduced risk of failures
-Easier maintenance thanks to single lamp operation, allowing to detect easily which lamps need to be replaced
-Dimmable up to 60% power level for additional energy savings
-Best environmental choice thanks to maximum lifetime reliability, in combination with minimum substances, packaging and product weight

Philips Dynapower system consists of an electronic DynaPower driver that operates one or two TUV Amalgam 230W, 260W and 335W XPT lamps. This system is extremely reliable and robust. The driver allows for immediate energy savings compared to similar drivers on the market. Moreover, it can be dimmed down to 60% power level for additional energy savings. Further energy savings are realized by the TUV Amalgam XPT lamps, because they can be dimmed down to reach the same UV output as similar lamps on the market.

Features
-Operates 230W, 260W and 335W TUV Amalgam XPT lamps
-Single lamp operation possible
-Cooler operating temperature for additional energy savings
-100% stress testing minimizing 0-hour failures
-Protection against voltage peaks
-Permanent overvoltage protection
-Approximately 20 seconds start-up time (compared with 90 seconds for similar drivers on the market)

Applications
-Deactivation of bacteria, viruses and other micro-organisms
-Municipal drinking water treatment equipment
-Municipal waste water treatment equipment
-Process water treatment equipment