EB phase is switched off during emergency operation
Short circuit protection
RoHS-compliant (excluding rechargeable batteries)
5-pin technology and therefore EMC-compliant even during emergency operation
Suitable for protection class I
EN 61347-1, EN 61347-2-7
Suitable for systems in accordance with VDE 0108 or EN 50172
Not suitable for lamps with an integrated starter
Cyclic charging of the NiMH battery is microprocessor controlled, which can extend battery life by up to 30%
Dimensions (LxWxH): 210 x 31.4 x 21.5 mm
Fixing hole distance: 205.5 mm
Ambient temperature: 0 to 50 °C
These VS emergency lighting modules include an automatic self-diagnosis feature that performs a two-minute function test of the device, the lamp and the battery every seven days. In addition, the operating period is tested every 12 months with subsequent battery reactivation.
Optical status display
-Red LED, flashing intermittently: defective lamp. The status display will be reset approx. one minute after the fault has been rectified.
-White LED, not illuminated: if connected to the power supply, the LED must turn green after a maximum of five minutes. If not, the device either has no voltage supply or the emergency lighting module is defective.
-Red LED, permanently flashing: battery capacity is too low or the battery supply line has been interrupted.
-Green LED: fully functional.
Permissible mains voltage: 230 V ±10%
Permissible mains frequency: 50–60 Hz
Power consumption with standby circuit: 3W
Nominal period of operation: 1 to 3 hours, depending on the type of rechargeable battery
Batteries: NiCd or NiMH
Charging time: 24 hrs
Protection class 1
Degree of protection: IP20
Casing: Metal (zinc-plated)
Installation outside the luminaire: Permissible lead length between the emergency lighting module and the lamp must not exceed two metres.
Vossloh Schwabe EMXs 180.000 1h Ni-Cd Varnostni modul 4050732936555 188792