Predstikalne naprave, elektronske, zatemnilne DALI

Osram QTi DALI T e 2x18 42W 220V DIM Quicktronic intelligent

060822 | Proizvajalec: Osram | EAN: 4008321060822 | MPN: QTI-DALI-T-E-2-18-42

QUICKTRONIC INTELLIGENT DALI DIM CFL. Elektronska predatikalna naprava za kompaktne fluorescenčne sijalke in fluorescenčne sijalke.


67,68 €z DDV
55,48 €brez DDV

Cena za 1 kos.
Stanje: Nov izdelek
Tovarniško pakiranje - kosov (kos): 10

Z nakupom tega izdelka lahko zberete do 11 točk zvestobe. Vaša košarica bo dobila skupaj 11 točke, ki se jih lahko zamenja za kupon v vrednosti 1,10 €.

-+

Podrobnosti

Podrobnosti

Nominal voltage 220…240V
Mains frequency 50…60Hz
DC voltage 154…276V
Operating frequency 42…140 kHz
Max. no. of ECGs on circuit breaker 10A 8
Max. no. of ECGs on circuit breaker 16A 13

Starting time 0.6 s

Length 123 mm
Width 79 mm
Height 33 mm
Mounting hole spacing, length 129.5 mm
Mounting hole spacing, width 67 mm
Cable cross-section, input side 0.5…1.5mm²

Ambient temperature range +10…+50 °C

Footnote only for product Optional cable clamp, see chapter ECG mountings - cable clamp

Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range 3…100%
Dimmable Yes
Overheating protection Yes
Suitable for fixtures with prot. class I
End of lamp life safety shutdown EOL T.2

Approval marks – approval VDE / E1 approval / VDE-EMC
EEI – Energy Label A1 BAT
Standards acc. to EN 61347-2-3/acc. to EN 60929/acc. to EN 55015: 2006 + A1: 2007/acc. to EN 61000-3-2/acc. to EN 61547

Product benefits
-Easy change of defect ECG thanks to available System+ Guarantee
-Easy integration in luminaire thanks to same dimensions like DALI GI ECG

DALI product features
-Control via the DALI interface
-Compliance with the DALI standard to IEC 60929 and IEC 62386
-Control input protected against overvoltage and polarity reversal (Osram ECG)

Touch DIM and Touch DIM Sensor function
-Manual dimming without any controller and with standard switches
-Including memory function (double click) and soft start

Areas of application
-Suitable for emergency light installations

Product features
-Corridor function for direct connection of ECG to common motion sensor
-Corridor function with pre-programmed light program
-TouchDIM function for free parameterization of light value and turn on time
-Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
-Fit for Emergency function for automatic detection of emergency lighting by ECG
-Very low standby power consumption: < 0.2W (A1 BAT)
-Lifetime: up to 100000h (temperature at Tc = 65 °C, max. 10% failure rate)
-Very high number of switching cycles: up to 300000
-Dimming range: 1…100% (3…100% with compact fluorescent lamp)
-POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime
-Line frequency: 0 Hz, 50Hz…60Hz, rectified

Možnost zatemnitveDa
Napetost - Volt (V)220
Mednarodna oznaka zaščite - (IPXX)IP20
Življenska doba - ure (h)100000
Tovarniško pakiranje - kosov (kos)10

Varnostna navodila

Vprašanja

Vprašanja

Bodite prvi, ki bo zastavil vprašanje o tem izdelku!


Vprašanje o izdelku

* Zahtevana polja
Mnenja

Mnenja

Klikni tukaj in napiši svoje mnenje

Kupci, ki so kupili , so kupili tudi:

Ogledano

Košarica

Ni izdelkov

Izračunano kasneje Dostava
0,00 € Skupaj

Cene brez DDV

Primerjava izdelkov

    Ni izbranih izdelkov za primerjavo