Philips HF-P 170 TL-D EII 220-240V

934116 - Philips - 8711500934116 - 913700191366

HF-Performer TL-D EII je tanka, lahka, visoko frekvenčna elektronska predstikalna naprava za TL-D fluorescenčne sijalke, ki temeljijo na EII tehnologiji.

Več podatkov

23,57€brez DDV


Teža: 0.21 kg
Dostava: 1 do 3 dni
Stanje: Nov izdelek

- +

0
  0 / 5 - 0 komentarjev  Dodaj komentar



 
Podrobnosti


Application code EII
Rated Lamptype TL-D
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 70W
Line Voltage 220-240V
Line Frequency 50/60 Hz
Housing L 280x30x28
Energy Efficiency Index A2 BAT
Lifetime 90% surv.@Tcaselife 50000 hr
Ignition Method Warm Start

Automatic restart Yes
Ignition time 0.55 (max) s
Operating frequency 42 (min), 45 (nom) kHz
Mains voltage safety (AC) -10%/+10%
Mains voltage performance (AC) -8%/+6%
Inrush current Peak 18 (max) A
Inrush current Width 0.25 ms
Earth leakage current 0.5 mA
Power losses gear 7.8W
Constant wattage deviation -2%/+2%
Ballast Lumen Factor 0.95 -
PowerFactor 100% output power 0.99 -
Battery voltage lamp ignition 196-254V
Battery voltage running lamps 176-254V
Overvoltage protection 320Vac 48 hr
Overvoltage protection 350Vac 2 hr
Crestfactor 1.7 (max) -
Hum and Noise level Inaudible

Cable-Cap outputwires to earth 200 pF
Cable-Cap outputwires mutual 200 pF
Conn.type input terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Conn.type output terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Max. cable length Hot Wires 0.75 m
Striplength 8.0-9.0 mm
Dual fixture Master/Slave Not applicable [Master/Slave oper. not applicable]
Wcs Input terminals 0.50-1.50 mm2
Wcs Output terminals 0.50-1.50 mm2

Rated Lamp Power on TL-D 70W
System Power on TL-D 67.8W
Lamp Power on TL-D 60W
Power Loss on TL-D 7.8W

T-case life 75 C
T-case maximum 75 (max) C
T-ignition -25 (min), 50 (max) C
T-ambient -25 (min), 50 (max) C
T-storage -40 (min), 80 (max) C

Length A1 280.0 mm
Fixing Hole Distance Length A2 265.0 mm
Width B1 30.0 mm
Height C1 28.0 mm
Fixing Hole Diameter D1 4.2 mm

Approval marks ENEC / VDE-EMV
CE marking Yes
Temperature marking 110 [Yes]
Emergency standard IEC 60598-2-22


An energy-efficient solution
-High CELMA Energy Efficiency Index A2
-The programmed start enables the lamp to be switched on and off more than 50,000 times without reducing useful lamp life
-Suitable for luminaires in protection class I and, after testing, class II

Features
-Programmed start: flicker-free, warm start circuit preheats (0.5 s) the lamp electrodes; lamps can be switched on and off without reducing useful life
-Smart power: constant light independent of mains voltage fluctuations
-Unit is protected against excessive mains voltages and incorrect connections
-Automatic stop circuit is activated within 5 seconds in case of lamp failure (safety stop); ballast resets automatically after lamp replacement
-Universal connector for both manual and automatic wiring

Applications
-Suitable for operation with movement-detection control systems like Philips OccuPlus
-Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools
-Maximum reliability in system operation

Philips HF-P 170 TL-D EII 220-240V 8711500934116 913700191366

 
Tehnični podatki
Možnost zatemnitveNe
Napetost - volt (V)220-240
Življenska doba - ure (h)50000
Tovarniško pakiranje - kosov (kos)12
Skupna ocena:
0/5
Temelji na 0 komentarjev
Filter:
(0)
(0)
(0)
(0)
(0)

Zgodovina ogledov

Meni

0 Primerjaj