UV-A reprography lamps
612625 | Manufacturer: Philips | EAN: 8711500612625 | MPN: 928005901029
Flexo print TL lamps emit almost all of their light (99. 9% ) in the useful UVA and visible blue wavebands – between 350 and 400nm – and have peak intensity at 370nm (except for the /03 version). This makes them ideal for flexo printing equipment and photopolymerization processes.
By buying this product you can collect up to 4 loyalty points. Your cart will total 4 points, that can be converted into a voucher of 0,40 €.
Cap-Base G13
Bulb T38
Main Application Reprography
Useful Life 1000h
Color Code 10-R
Color Designation (text) Ultra VioletA
Chromaticity Coordinate X 222 -
Chromaticity Coordinate Y 210 -
Depreciation 500 hours 10%
Lamp Wattage 80W
Lamp Wattage Technical 80W
Lamp Voltage 110V
Lamp Current 0.83A
Mercury (Hg) Content 13 mg
UV-A Radiation 100h (IEC) 20.5W
UV-B/UV-A (IEC) 0.1%
Base Face to Base Face A 1500 (max) mm
Insertion Length B 1504.7 (min), 1507.1 (max) mm
Overall Length C 1514.2 (max) mm
Diameter D 40.5 (max) mm
Flexo print TL lamps emit almost all of their light (99.9%) in the useful UVA and visible blue wavebands – between 350 and 400 nm – and have peak intensity at 370 nm (except for the /03 version). This makes them ideal for flexo printing equipment and photopolymerization processes. In addition, the ‘R’ lamps in the family have an internal 200-degree reflector to further optimize the lamp’s overall efficiency.
Flexo print TL – high efficiency in reprographics and photopolymerization
-Best match with photo sensitizers
-Highest output on irradiated area
Features
-Emit radiation in the range 380-480 nm with a maximum at 370 nm
-Internal reflector
Applications
-Flexoprint reprograhic equipment, Diazo copying machines
Data sheet: UV-A reprography lamps Flexo Print TL 80W/10 R G13 Reprography
It needs ballast | Yes |
Base/Sockel | G13 |
Wattage - Watt (W) | 80 |
Light color code | 10 |
Energy consumption - (kWh / 1000h) | 80 |
Lifetime - hours (h) | 1000 |
Factory Box - pieces (pcs) | 25 |
Philips tanning starters: a complete range of easy-to-install eco-friendly starters for tanning lamps operating on a conventional electromagnetic ballast.
HF-Performer III TLD is a sustainable, slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required.
Flexo print TL lamps emit almost all of their light (99. 9% ) in the useful UVA and visible blue wavebands – between 350 and 400nm – and have peak intensity at 370nm (except for the /03 version). This makes them ideal for flexo printing equipment and photopolymerization processes.