UV-A reprography lamps
694676 | Manufacturer: Osram | EAN: 4008321694676 | MPN: HTC-400-241
SUPRATEC UV high pressure lamps for technical applications: curing large areas of plastic, drying paint and varnishes, glue curing, exposure of diazo film material and print masters, artificial material aging, fluorescence excitation (with black glass filters), curing large areas of plastic.
By buying this product you can collect up to 9 loyalty points. Your cart will total 9 points, that can be converted into a voucher of 0,90 €.
Nominal wattage 460W
Nominal voltage 230V
Construction voltage 230V
Radiated power 315…400 nm (UVA) 82W
Radiated power 280…315 nm (UVB) 12W
Diameter 14 mm
Length 104 mm
Light center length (LCL) 33 mm
Arc length 33 mm
Lifespan 1000h
Base (standard designation) R7s
Burning position s180
Areas of application
-Curing large areas of plastic
-Drying paint and varnishes
-Glue curing
-Exposure of diazo film material and print masters
-Artificial material aging
-Fluorescence excitation (with black glass filters)
-Curing large areas of plastic
Product features
-SUPRATEC UV high pressure lamps for technical applications
Attention
SUPRATEC lamps emit UV radiation of high intensity which can cause sunburn and conjunctivitis. Skin or eyes must not be exposed to direct or reflected unfiltered radiation! Operate in closed fixtures only.
Data sheet: UV-A reprography lamps Supratec HTC 400 241W 220V R7s
It needs ballast | Yes |
Base/Sockel | R7s |
Voltage - Volt (V) | 220 |
Wattage - Watt (W) | 400 |
Energy consumption - (kWh / 1000h) | 400 |
Lifetime - hours (h) | 1000 |
Factory Box - pieces (pcs) | 25 |
Electromagnetic ballast for high pressure sodium lamps (HS) and metal halide lamps (HI).
UV lamp for technical applications: Sunlight simulation, glue curing, artificial material aging, exposure of UV-sensitive photoresist coatings, terrariums, equine solaria.
Partly enclosed R7s lampholder for mains voltage halogen incandescent lamps. Casing: ceramic.
Lampholder E27 for incandescent lamps and discharge lamps with base E27. Material: porcelain, white.
Direct replacement for mercury lamps as they operate on the same control gear. Instant and cost-effective upgrade of light level and reduction of energy use replacing HQL.