PdLux PD-LED2036 Microwave Sensor Emergency Intelligent Lamp 11W

381368

-

PdLux

-

3830025381368

-

PD-LED2036

This is a kind of totally newly-designed, intelligent ceiling mounting Microwave sensor LED lamp, which is attached with the function of power supply in emergency.

More details

132,20€tax excl.


Weight: 1.15 kg
Delivery: 1 to 3 days
Condition: New product

- +

0
  0 / 5 - 0 reviews  Add Review

 
More info

Power source: 100-240V/AC
Power frequency: 50/60Hz
Rated load: 11W
Detection angle: 360°
Detection range: 1-10m
Time setting: 8sek-12min
LED quantity: 215pcs
Protection: IP44
Dimension: 320mm x 108mm
Housing: glass


This is a kind of totally newly-designed, intelligent ceiling mounting Microwave sensor LED lamp, which is attached with the function of power supply in emergency. The lighting is managed by the outside power supply or the built-in battery. When AC power supplying, the LED power is 30W.When power failure, the built-in battery will automatically supply the power 15W to LED to achieve the equivalent illumination with that of 60W incandescent bulb. The battery can continuously supply power for more than 1.5 hours and in the sensor energy-saving mode for 6 hours or more. It is widely applied in the corridor, washing room, elevator lobby and so forth.
The intelligent management of the system enhances the advantages of stability and energy-saving. The MCU will auto-examine each circuit and manage the detected information in reasonable way. When there is no any signal detected, the system will start the power-saving mode and decline the power output progressively. The minimum output is one tenth of the maximum value, which, to large extend, lessens the power consumption, lowers the temperature of the heating elements and reduces the LED light loss resulted from the high temperature. Thus, it promotes the reliability of the product and extends the life span.
This product is designed with two configurations: one is the sensor lamp with the function of supplying power in emergency and the other one is the intelligent sensor lamp without the emergency function. You can make purchase according to the practical need. But in most cases, it is necessary and wise to choose the former one, for that the occasional power outage will cause trouble, or even danger.

Feature and advantage
-managed by the outside power supply or the built-in battery
-The battery can continuously supply power for more than 1.5 hours
-The MCU will auto-examine each circuit
-Use high quality PC lampshade.
-Strengthen the flexible refraction of light
-function of anti-ultraviolet

PdLux PD-LED2036 Microwave Sensor Emergency Intelligent Lamp 11W 3830025381368 PD-LED2036

 
Data sheet
DimmableNo
Energy Efficiency ClassA+
Voltage - volt (V)230
Wattage - watt (W)11
Energy consumption - (kWh / 1000h)11
International Protection Marking - (IPXX)IP44
Factory Box - pieces (pcs)10
 
Reviews (0)
Total rating:
0/5
Based on 0 reviews
Filter:
(0)
(0)
(0)
(0)
(0)

 
Product questions (0)

Ask a question

Question will be displayed after moderation.



Recently Viewed

No products

Close

Menu

0 Compare