Osram Optotronic OT 150/220-240V 700mA 3DIMLT+ E LED








OPTOTRONIC Constant current LED power supply with 3DIM/DALI.

More details

87,54€tax excl.

Weight: 1.11 kg
Delivery: 1 to 3 days
Condition: New product

- +

  0 / 5 - 0 reviews  Add Review
More info

Nominal voltage 220…240V
Input voltage AC 195…264V
Nominal current 0.72 A
Mains frequency 50…60 Hz
Nominal input voltage (SD port) 220…240V
Power factor λ 0.95/0.90
Total harmonic distortion 10 %
Device power loss 15.0W
Inrush current 58 A
Max. ECG no. on circuit breaker 10 A (B) 4
Max. ECG no. on circuit breaker 16 A (B) 9
Max. ECG no. on circuit breaker 25 A (B) 20
Surge capability (L/N-Ground) 6 kV
Surge capability (L-N) 6 kV
Surge capability (L/N – SD) 4 kV
Surge capability (SD – Ground) 4 kV
Nominal output power 150W
ECG efficiency 90.5 %
Nominal output voltage 95…335V
U-OUT (working voltage) 350V
Nominal output current 350…700 mA
Output current tolerance ±5 %
Minimum output current 75 mA

Mounting hole spacing, length 160.0 mm
Mounting hole spacing, width 90.0 mm
Length 170.0 mm
Width 100.0 mm
Height 40.0 mm
Cable cross-section, input side 0.25…2.5 mm2
Cable cross-section, output side 0.25…1.5 mm2
Wire preparation length, input side 10…11 mm

Ambient temperature range -30…+55 °C
Temperature range at storage -20…80 °C
Maximum temperature at tc test point 85 °C
Max.housing temperature in case of fault 120 °C

ECG lifetime 85000 h

Dimmable Yes
Dimming interface 3DIM / DALI / StepDIM / AstroDIM
Dimming range 10…100 %
Suitable for fixtures with prot. class I / II
Constant lumen function Programmable
NTC input Yes
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m

Type of protection IP20
Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to EN 61547/Acc. to IEC 62386-101/Acc. to IEC 62386-102/Acc. to IEC 62386-207
Approval marks – approval CE / ENEC 10 / VDE

Temperature range at storage -20…80 °C
Relative humidity 5…85 %

Product benefits
-Large output power range: up to 150W
-High surge protection: up to 4/6 kV (L-N), 4/6 kV (L/N-PE)
-Different dimming modes and levels can be set
-Stand-alone dimming function enables operation in existing installations

Areas of application
-Suitable for luminaires of protection classes I and II
-Suitable for outdoor applications in luminaires with IP > 54

Product features
-3DIM functionality (StepDIM/AstroDIM/DALI)
-Current output range: 75…700 mA
-Flexible current setting
-Constant lumen function
-Overtemperature protection via external NTC (3DIMLT+ version only)

Equipment / Accessories
-DALI magic hardware for configuring 3DIM ECGs necessary

Osram Optotronic OT 150/220-240V 700mA 3DIMLT+ E LED 4008321978202 OT-150-220-240-3DIMLT

Data sheet
Dimmable Yes
Voltage - volt (V) 220-240
Current - ampere (A) 0.7
Wattage - watt (W) 150
Energy consumption - (kWh / 1000h) 150
International Protection Marking - (IPXX) IP20
Lifetime - hours (h) 85000
Factory Box - pieces (pcs) 10
Reviews (0)
Total rating:
Based on 0 reviews

Knowledge Base

  • Do you deliver abroad?

    Yes, we deliver abroad. In the EU, the US and also in all other parts of the world. For delivery using proven and reliable delivery service.

Recently Viewed

No products



0 Compare