Osram PTO 50/220-240 3DIM








POWERTRONIC OUTDOOR PTo ECG for HID lamps, for outdoor lighting.

More details

84,76€tax excl.

Weight: 0.78 kg
Delivery: 1 to 3 days
Condition: New product

- +

  0 / 5 - 0 reviews  Add Review

Suggest price
  • PDF Product datasheet
    More info

    Lamp wattage 50W
    Line current 0.26 A
    Ignition voltage 4.5 kVp
    Operating frequency 0.165 kHz
    System wattage 55W
    Power loss in stand-by mode <0.5 W
    ECG efficiency 91 %
    Input voltage 220…240V
    Voltage range 198…264V
    Mains frequency 50…60 Hz
    Power factor λ 0.95
    Inrush current 45 A
    Max. no. of ECGs on circuit breaker 10 A 7
    Max. no. of ECGs on circuit breaker 16 A 13
    Max. no. of ECGs on 16A MCB with EBN-OS 36
    Protective conductor current 0.1 mA
    U-OUT 250V
    Max. working voltage between LH and LL 250V
    Max. working voltage betw. LL/LH & earth 250V
    Max. capacitance of wire ECG/lamp 120 pF
    Surge capability (L-N) 3 kV
    Surge capability (L/N-Ground) 4 kV

    Length 133.0 mm
    Width 77.0 mm
    Height 48.0 mm
    Mounting hole spacing, length 123.0 mm
    Cable cross-section, input side 0.5…2.5 mm2
    Cable cross-section, output side 0.5…2.5 mm2
    Wire preparation length, input side 10…11 mm
    Wire preparation length, output side 10…11 mm

    Casing material Plastic

    Ambient temperature range -25…+55 °C
    Maximum temperature at tc test point 75 °C

    ECG lifetime 60000 h

    Required IP rating of luminaire ≥ 54
    Design / version ECG outdoor
    Encapsulated Yes
    System guarantee level 3c

    Dimming interface DALI / StepDIM / AstroDIM
    Dimming range 70…100 %
    Maximum wiring length ECG/lamp 1.5 m
    Burn-in time prior to dimming operation 10 min
    Overheating protection Power reduction and switch off at T > 75 °C at the tc point
    ECG reset time > 0.5 s
    Dimmable Yes (HQI lamps excluded from dimming)
    Restriction on ignition time 20 min
    Suitable for fixtures with prot. class I / II
    Lightning stroke protection With connected equipotentiality-terminal 10 surges with 10 kV acc. to IEC 61000-4-5

    Approval marks – approval ENEC 10 / VDE / VDE-EMC / GOST / C-Tick
    Type of protection IP20
    EEI – Energy Label A2
    Standards acc. to EN 61347-2-12/acc. to EN 55015/acc. to EN 61000-3-2/acc. to EN 61547/acc. to EN 62386-101/acc. to EN 62386-102/acc. to EN 62386-103

    Product benefits
    -Energy savings up to 30 % (compared to CCG operation) thanks to 3DIM (except PTo 35)
    -High surge protection: up to 3 kV (L-N) / 4 kV (L/N-PE)
    -Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
    -Excellent thermal behavior for very high limit temperatures tc and ta

    Areas of application
    -Suitable for luminaires of protection classes I and II
    -Suitable for outdoor applications in fixtures with IP > 54

    Osram PTO 50/220-240 3DIM 4008321956347 PTO-50-DIM

    Data sheet
    Dimmable Yes
    Voltage - volt (V) 220-240
    Wattage - watt (W) 50
    Energy consumption - (kWh / 1000h) 50
    International Protection Marking - (IPXX) IP20
    Lifetime - hours (h) 60000
    Factory Box - pieces (pcs) 20
    Reviews (0)
    Total rating:
    Based on 0 reviews

    Knowledge Base

    • Do you deliver abroad?

      Yes, we deliver abroad. In the EU, the US and also in all other parts of the world. For delivery using proven and reliable delivery service.

    Recently Viewed


    0 Compare