Osram PTI 20/220-240 I








POWERTRONIC INTELLIGENT PTi I ECG for HID lamps, with cable clamp.

More details

29,55€tax excl.

Weight: 0.18 kg
Delivery: 1 to 3 days
Condition: New product
Factory Box - pieces (pcs): 10

- +

Suggest price
  • PDF Product datasheet
  • Volume discounts

    Quantity Discount You Save
    10 4% Up to 11,82€
    25 8% Up to 59,10€
    100 12% Up to 354,60€
      0 / 5 - 0 reviews  Add Review

    More info

    Lamp wattage 20W
    Line current 0.11 A
    Ignition voltage 3.0 kVp
    Operating frequency 0.100…0.120 kHz
    System wattage 23.00W
    ECG efficiency 87 %
    Input voltage AC 220…240V
    Input voltage range 198…264V
    Mains frequency 50…60 Hz
    Power factor λ 0.95
    Inrush current 12 A
    Max. ECG no. on circuit breaker 10 A (B) 22
    Max. ECG no. on circuit breaker 16 A (B) 33
    Max. no. of ECGs on 16A MCB with EBN-OS 82
    Maximum current for mains looping 16 A
    Protective conductor current 0.2 mA
    U-OUT (working voltage) 250V
    Max. working voltage between LH and LL 250V
    Max. working voltage betw. LL/LH & earth 250V
    Max. capacitance of wire ECG/lamp 120 pF

    Length 204.0 mm
    Width 50.0 mm
    Height 32.0 mm
    Mounting hole spacing, length 186.5 mm
    Cable cross-section, input side 0.75…2.5 mm2
    Cable cross-section, output side 0.75…2.5 mm2
    Wire preparation length, input side 10…11 mm
    Wire preparation length, output side 10…11 mm

    Casing material Plastic

    Ambient temperature range -25…+60 °C
    Maximum temperature at tc test point 75 °C

    ECG lifetime 50000 h

    Design / version With cable clamp

    Max. cable length to lamp/LED module 1.5 m
    Overheating protection Switch off at T > 75 °C at the tc point
    ECG reset time > 0.5 s
    Cable/wire types, input side NYM-J 3x1.5 / NYM-J 3x2.5 / H05VV-F 3x1.5 / NHXMH-J 3x1.5 mm2
    Cable/wire types, output side SIHF-J 3x1.5 / SIHF-J 3x2.5 / SIHSI 3x1.0 mm2
    Dimmable No
    Restriction on ignition time 20 min
    Suitable for fixtures with prot. class I

    Approval marks – approval ENEC 10 / VDE / VDE-EMC / EAC / C-Tick
    Type of protection IP20
    EEI – Energy Label A2
    Standards Acc. to EN 61347-2-12/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61547/Acc. to EN 62493

    Product benefits
    -Extended terminal section enables mains looping
    -Screw-down cable clamps for reliable strain relief
    -Long reliable life at maximum permitted temperatures
    -Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)

    Areas of application
    -Shop lighting
    -Health and fitness areas (in dry, corrosion-protected place)
    -Effect and accent lighting

    Osram PTI 20/220-240 I 4008321404763 PTI-20-I

    Data sheet
    Dimmable Yes
    Voltage - volt (V) 220-240
    Wattage - watt (W) 20
    Energy consumption - (kWh / 1000h) 20
    International Protection Marking - (IPXX) IP20
    Lifetime - hours (h) 50000
    Factory Box - pieces (pcs) 10
    Reviews (0)
    Total rating:
    Based on 0 reviews

    Knowledge Base

    • Do you deliver abroad?

      Yes, we deliver abroad. In the EU, the US and also in all other parts of the world. For delivery using proven and reliable delivery service.

    Recently Viewed


    0 Compare