Philips HF-P 258 TL-D III 220-240V








HF-Performer III TLD is a sustainable, slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required.

More details

16,01€tax excl.

Weight: 0.22 kg
Delivery: 1 to 3 days
Condition: New product

- +

  0 / 5 - 0 reviews  Add Review
More info

Application code III
Rated Lamptype TL-D
Rated Number of Lamps 2 piece
Rated Ballast-Lamp Power 58W
Line Voltage 220-240V
Line Frequency 50/60 Hz
Housing L 280x30x28
Energy Efficiency Index A2 BAT
Lifetime 90% surv.@Tcaselife 50000 hr
Ignition Method Programmed Start

Automatic restart Yes
Ignition time 0.9 (max) s
Operating frequency 45 kHz
Mains voltage safety (AC) -10%/+10%
Mains voltage performance (AC) -8%/+6%
Inrush current Peak 31 (max) A
Inrush current Width 0.35 ms
Earth leakage current 0.5 mA
Power losses gear 7.5W
Constant wattage deviation -2%/+2%
Ballast Lumen Factor 1.02 -
PowerFactor 100% output power 0.98 -
Battery voltage lamp ignition 186-275V
Battery voltage running lamps 186-275V
Overvoltage protection 320Vac 48 hr
Overvoltage protection 350Vac 2 hr
Crestfactor 1.7 (max) -
Hum and Noise level < 30 dB(A)

Cable-Cap outputwires to earth 200 pF
Cable-Cap outputwires mutual 200 pF
Conn.type input terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Conn.type output terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Max. cable length Hot Wires 0.75 m
Striplength 8.0-9.0 mm
Dual fixture Master/Slave Not applicable [Master/Slave oper. not applicable]
Wcs Input terminals 0.50-1.00 mm2
Wcs Output terminals 0.50-1.00 mm2

Rated Lamp Power on TL-D 58W
System Power on TL-D 105.5W
Lamp Power on TL-D 98W
Power Loss on TL-D 7.5W

T-case life 80 C
T-case maximum 80 (max) C
T-ignition -25 (min), 60 (max) C
T-ambient -25 (min), 60 (max) C
T-storage -40 (min), 50 (max) C

Bal Lm Fac Emergency operation 0.7 -
Light output after 5 sec 50% of EBLF
Light output after 60 sec 100% of EBLF
Normal operating voltage (DC) 220-240V
Batt volt guaranteed ignition 186-275V
Batt volt guaranteed operation 176-275V

Length A1 280.0 mm
Fixing Hole Distance Length A2 265.0 mm
Width B1 30.0 mm
Height C1 28.0 mm
Fixing Hole Diameter D1 4.2 mm

Approval marks ENEC / VDE-EMV
CE marking Yes
Temperature marking 110 [Yes]
Emergency standard IEC 60598-2-22

An energy-efficient solution
-The programmed start enables the lamp to be switched on and off without reducing useful lamp life.
-DC emergency operation in line with IEC/EN 60598-2-22 luminaire norms
-Smart power ensures constant light, irrespective of mains-voltage fluctuations
-Suitable for luminaires in protection class I and, after testing, class II
-The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring.

-Robust design for 100,000 hours lifetime at Ta=50 ˚C and over 100,000 on/off switching operations on one lamp
-Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life
-Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations
-The unit is protected against excessive mains voltage and incorrect connections.

-Used with movement-detection control systems like Philips OccuPlus
-Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools
-Class I outdoor applications, e.g. industrial premises and parking lots

Philips HF-P 258 TL-D III 220-240V 8711500999726 913713031966

Data sheet
Dimmable No
Voltage - volt (V) 220-240
Lifetime - hours (h) 50000
Factory Box - pieces (pcs) 12
Reviews (0)
Total rating:
Based on 0 reviews

Knowledge Base

  • Do you deliver abroad?

    Yes, we deliver abroad. In the EU, the US and also in all other parts of the world. For delivery using proven and reliable delivery service.

Recently Viewed


0 Compare