Philips HF-P 170 TL-D EII 220-240V








Slim, lightweight High Frequency electronic ballast for TL-D fluorescent lamps, based on EII technology.

More details

23,57€tax excl.

Weight: 0.22 kg
Delivery: 1 to 3 days
Condition: New product

- +

  0 / 5 - 0 reviews  Add Review
More info

Application code EII
Rated Lamptype TL-D
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 70W
Line Voltage 220-240V
Line Frequency 50/60 Hz
Housing L 280x30x28
Energy Efficiency Index A2 BAT
Lifetime 90% surv.@Tcaselife 50000 hr
Ignition Method Warm Start

Automatic restart Yes
Ignition time 0.55 (max) s
Operating frequency 42 (min), 45 (nom) kHz
Mains voltage safety (AC) -10%/+10%
Mains voltage performance (AC) -8%/+6%
Inrush current Peak 18 (max) A
Inrush current Width 0.25 ms
Earth leakage current 0.5 mA
Power losses gear 7.8W
Constant wattage deviation -2%/+2%
Ballast Lumen Factor 0.95 -
PowerFactor 100% output power 0.99 -
Battery voltage lamp ignition 196-254V
Battery voltage running lamps 176-254V
Overvoltage protection 320Vac 48 hr
Overvoltage protection 350Vac 2 hr
Crestfactor 1.7 (max) -
Hum and Noise level Inaudible

Cable-Cap outputwires to earth 200 pF
Cable-Cap outputwires mutual 200 pF
Conn.type input terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Conn.type output terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Max. cable length Hot Wires 0.75 m
Striplength 8.0-9.0 mm
Dual fixture Master/Slave Not applicable [Master/Slave oper. not applicable]
Wcs Input terminals 0.50-1.50 mm2
Wcs Output terminals 0.50-1.50 mm2

Rated Lamp Power on TL-D 70W
System Power on TL-D 67.8W
Lamp Power on TL-D 60W
Power Loss on TL-D 7.8W

T-case life 75 C
T-case maximum 75 (max) C
T-ignition -25 (min), 50 (max) C
T-ambient -25 (min), 50 (max) C
T-storage -40 (min), 80 (max) C

Length A1 280.0 mm
Fixing Hole Distance Length A2 265.0 mm
Width B1 30.0 mm
Height C1 28.0 mm
Fixing Hole Diameter D1 4.2 mm

Approval marks ENEC / VDE-EMV
CE marking Yes
Temperature marking 110 [Yes]
Emergency standard IEC 60598-2-22

An energy-efficient solution
-High CELMA Energy Efficiency Index A2
-The programmed start enables the lamp to be switched on and off more than 50,000 times without reducing useful lamp life
-Suitable for luminaires in protection class I and, after testing, class II

-Programmed start: flicker-free, warm start circuit preheats (0.5 s) the lamp electrodes; lamps can be switched on and off without reducing useful life
-Smart power: constant light independent of mains voltage fluctuations
-Unit is protected against excessive mains voltages and incorrect connections
-Automatic stop circuit is activated within 5 seconds in case of lamp failure (safety stop); ballast resets automatically after lamp replacement
-Universal connector for both manual and automatic wiring

-Suitable for operation with movement-detection control systems like Philips OccuPlus
-Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools
-Maximum reliability in system operation

Philips HF-P 170 TL-D EII 220-240V 8711500934116 913700191366

Data sheet
Dimmable No
Voltage - volt (V) 220-240
Lifetime - hours (h) 50000
Factory Box - pieces (pcs) 12
Reviews (0)
Total rating:
Based on 0 reviews

Knowledge Base

  • Do you deliver abroad?

    Yes, we deliver abroad. In the EU, the US and also in all other parts of the world. For delivery using proven and reliable delivery service.

Recently Viewed


0 Compare