Philips HF-P 158 TL-D III 220-240V

999702 - Philips - 8711500999702 - 913713031866

HF-Performer III TLD is a sustainable, slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required.

More details

13,96€tax excl.

Weight: 0.21 kg
Delivery: 1 to 3 days
Condition: New product

- +

  0 / 5 - 0 reviews

More info

Application code III
Rated Lamptype TL-D
Rated Number of Lamps 1 piece
Rated Ballast-Lamp Power 58W
Line Voltage 220-240V
Line Frequency 50/60 Hz
Housing L 280x30x28
Energy Efficiency Index A2 BAT
Lifetime 90% surv.@Tcaselife 50000 hr
Ignition Method Programmed Start

Automatic restart Yes
Ignition time 1.5 (max) s
Operating frequency 45 kHz
Mains voltage safety (AC) -10%/+10%
Mains voltage performance (AC) -8%/+6%
Inrush current Peak 18 (max) A
Inrush current Width 0.25 ms
Earth leakage current 0.5 mA
Power losses gear 4.8W
Constant wattage deviation -2%/+2%
Ballast Lumen Factor 0.97 -
PowerFactor 100% output power 0.97 -
Battery voltage lamp ignition 186-275V
Battery voltage running lamps 186-275V
Overvoltage protection 320Vac 48 hr
Overvoltage protection 350Vac 2 hr
Crestfactor 1.7 (max) -
Hum and Noise level < 30 dB(A)

Cable-Cap outputwires to earth 200 pF
Cable-Cap outputwires mutual 200 pF
Conn.type input terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Conn.type output terminals WAGO 251 universal connector [Suitable for both automatic wiring (ALF and ADS) and manual wiring]
Max. cable length Hot Wires 0.75 m
Striplength 8.0-9.0 mm
Dual fixture Master/Slave Not applicable [Master/Slave oper. not applicable]
Wcs Input terminals 0.50-1.00 mm2
Wcs Output terminals 0.50-1.00 mm2

Rated Lamp Power on TL-D 58W
System Power on TL-D 56.7W
Lamp Power on TL-D 51.9W
Power Loss on TL-D 4.8W

T-case life 80 C
T-case maximum 80 (max) C
T-ignition -25 (min), 60 (max) C
T-ambient -25 (min), 60 (max) C
T-storage -40 (min), 50 (max) C

Bal Lm Fac Emergency operation 0.7 -
Light output after 5 sec 50% of EBLF
Light output after 60 sec 100% of EBLF
Normal operating voltage (DC) 220-240V
Batt volt guaranteed ignition 186-275V
Batt volt guaranteed operation 176-275V

Length A1 280.0 mm
Fixing Hole Distance Length A2 265.0 mm
Width B1 30.0 mm
Height C1 28.0 mm
Fixing Hole Diameter D1 4.2 mm

Approval marks ENEC / VDE-EMV
CE marking Yes
Temperature marking 110 [Yes]
Emergency standard IEC 60598-2-22

An energy-efficient solution
-The programmed start enables the lamp to be switched on and off without reducing useful lamp life.
-DC emergency operation in line with IEC/EN 60598-2-22 luminaire norms
-Smart power ensures constant light, irrespective of mains-voltage fluctuations
-Suitable for luminaires in protection class I and, after testing, class II
-The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring.

-Robust design for 100,000 hours lifetime at Ta=50 ˚C and over 100,000 on/off switching operations on one lamp
-Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life
-Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations
-The unit is protected against excessive mains voltage and incorrect connections.

-Used with movement-detection control systems like Philips OccuPlus
-Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools
-Class I outdoor applications, e.g. industrial premises and parking lots

Philips HF-P 158 TL-D III 220-240V 8711500999702 913713031866

Data sheet
Dimmable No
Voltage - volt (V) 220-240
Lifetime - hours (h) 50000
Factory Box - pieces (pcs) 12
Total rating:
0 1 2 3 4
Based on 0 reviews
0 1 2 3 4 (0)
0 1 2 3 0 (0)
0 1 2 0 1 (0)
0 1 0 1 2 (0)
0 0 1 2 3 (0)

Recently Viewed


0 Compare