Capacitors
505872 | Manufacturer: Vossloh Schwabe | MPN: 505872
For T/TC Fluorescent Lamps – 280/300 V, flame- and explosion-proof with break-action mechanism.
By buying this product you can collect up to 3 loyalty points. Your cart will total 3 points, that can be converted into a voucher of 0,30 €.
Type B Capacitors with an Aluminium Casing.
For T/TC Fluorescent Lamps – 280/300 V, flame- and explosion-proof with break-action mechanism.
Type: 41069
Capacity: 65mF
Dimension / Lenght mm: 45/148
Mounting: M8 x 10 bolt
Filled / Dry: Vegetable oil
Terminal: Push-in terminal
Protection Device: FPU
Approval mark: III
Technical Details of Vossloh-Schwabe Parallel Capacitors
All VS capacitors comply with IEC 61048 A2 (Safety) and IEC 61049 (Operation). Capacitors rated 250V and 280V also bear the ENEC mark.
Nominal voltage
-250V, 50/60Hz;
-280V, 50/60Hz;
-450V, 50/60Hz(dependent on type)
Capacitance tolerance: ±10% ; ±5%
Temperature range: –40 to +85 °C
Relative humidity load:
-Class F for Type B capacitors
-75% annual mean
-95% peak value on 30 days
-Class G for Type A capacitors
-65% annual mean
-85% peak value on 30 days
Capacitors must not be subjected to condensation
Failure rates it maximum voltage, current and temperature values are complied with = 1 ‰ per 1000 operating hours
Permissible torque on the base screw:
-M8x10 – 5.0 Nm (aluminium casing)
-M8x10 – 2.2 Nm (plastic casing)
Split fixing pins with a clearance of 20 mm for plastic casings (side clip)
Optional thermal fuse (Type A capacitors)
Connecting wires:
Parallel capacitors for fluorescent lamps
-Casing diameter 25–30 mm: 0.5-–1mm² and IDC terminals for H05V-U 0.5 conductors
-Casing diameter >30 mm: 0.5–1mm² parallel capacitors for high-pressure lamps
Casing diameter 25–30 mm: 0,5–1mm² and IDC terminals for H05V-U 0.5 conductors
Casing diameter >30 mm: 0.5–1.5mm²
Data sheet: Capacitors VS Capacitor 65mF 50/60Hz 280V 41069
Dimmable | No |
Factory Box - pieces (pcs) | 10 |