Ballasts, electronic, dimmable DALI

Osram QTi DALI 3x18W 220V DIM T8 Quicktronic intelligent

069979 | Manufacturer: Osram | EAN: 4008321069979 | MPN: QTI-DALI-3-18

QUICKTRONIC INTELLIGENT DALI DIM T8. ECG for compact fluorescent lamps and T8 fluorescent lamps.

63,67 €tax excl.

Price for 1 piece, excluding shipping costs!
Condition: New product
Factory Box - pieces (pcs): 20

By buying this product you can collect up to 12 loyalty points. Your cart will total 12 points, that can be converted into a voucher of 1,20 €.


More info

More info

Input voltage AC 198…264V
Nominal voltage 220…240V
Mains frequency 50…60Hz
Input voltage DC 154…276V
Operating frequency 40…100 kHz
Max. ECG no. on circuit breaker 10A (B) 12
Max. ECG no. on circuit breaker 16A (B) 19
Power loss in stand-by mode < 0.5w br= > Inrush current 35A
Starting time 0.6 s
Length 360 mm
Width 40 mm
Height 21 mm
Mounting hole spacing, length 350 mm
Wire preparation length, input side 8.0…9 mm
Wire preparation length, output side 8.0…9 mm
Cable cross-section, output side 0.5…1.5 / 0.5…1mm²
Cable cross-section, input side 0.5…1.5 / 0.5…1mm²
Ambient temperature range 0…+50 °C
ECG lifetime 100000h
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range 1…100%
Dimmable Yes
Overload protection Yes
Overheating protection Power reduction and switch off at T > 75 °C at the tc point
Suitable for fixtures with prot. class I
End of lamp life safety shutdown EOL T.2
Approval marks – approval VDE / VDE-EMC / ENEC 10 / EL / GOST / RCM / CCC / E1 approval
EEI – Energy Label A1 BAT
Standards Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015: 2006 + A1: 2007/Acc. to EN 61000-3-2/Acc. to EN 61547
Protection class I
Type of protection IP20

Product benefits
- Easy integration in luminaire thanks to same dimensions like DALI GI ECG
- Touch DIM function for easy and inexpensive dimming of several ECGs
- Same luminous flux with direct and alternating current
- Dimming of amalgam lamps without flickering or reduced lifespan
- Automatic restart after lamp replacement
- No new approvals required

DALI product features
- Control via the DALI interface
- Compliance with the DALI standard to IEC 60929 and IEC 62386
- Control input protected against overvoltage and polarity reversal (Osram ECG)
Touch DIM and Touch DIM Sensor function
- Manual dimming without controller and with standard switches
- Including memory function (double click) and soft start

Areas of application
- Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
- Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
- Industry
- Open-plan offices, corridors and storage rooms
- Public buildings
- Sports halls and factories
- Strip lighting
- Shop lighting

Product features
- Corridor function for direct connection of ECG to common motion sensor
- Corridor function with pre-programmed light program
- Touch DIM function for free parameterization of light value and turn on time
- Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
- Fit for Emergency function for automatic detection of emergency lighting by ECG
- Very low standby power consumption: < 0.2W (A1 BAT)
- Lifetime: up to 100000h (temperature at Tc = 65 °C, max. 10% failure rate)
- Very high number of switching cycles: up to 300000
- Dimming range: 1…100% (3…100% with compact fluorescent lamp)
- POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime

Voltage - Volt (V)220
International Protection Marking - (IPXX)IP20
Lifetime - hours (h)100000
Factory Box - pieces (pcs)20

General safety informations



Be the first to ask a question about this product!

Question about the product

* Required fields


Write your own review


Shopping cart

No products

To be determined Shipping
0,00 € Total

Prices are tax excluded

Add to compare

    There are no products selected for comparison.