Ballasts, electronic, dimmable DALI

Osram QTi DALI T-E 2x18 42W 220V DIM Quicktronic intelligent

060822 | Manufacturer: Osram | EAN: 4008321060822 | MPN: QTI-DALI-T-E-2-18-42

More info

QUICKTRONIC INTELLIGENT DALI DIM CFL. ECG for compact fluorescent lamps and fluorescent lamps.

Nominal voltage 220 - 240 V
Mains frequency 50 - 60 Hz
DC voltage 154…276 V
Operating frequency 42…140 kHz
Max. no. of ECGs on circuit breaker 10 A 8
Max. no. of ECGs on circuit breaker 16 A 13
Starting time 0.6 s
Length 123 mm
Width 79 mm
Height 33 mm
Mounting hole spacing, length 129.5 mm
Mounting hole spacing, width 67 mm
Cable cross-section, input side 0.5-1.5 mm²
Ambient temperature range –10…+50 °C
Optional cable clamp, see chapter ECG mountings - cable clamp
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range 3…100%
Dimmable Yes
Overheating protection Yes
Suitable for fixtures with prot. class I
End of lamp life safety shutdown EOL T.2
Approval marks - approval VDE / E1 approval / VDE-EMC
EEI - Energy Label A1 BAT
Standards acc. to EN 61347-2-3/acc. to EN 60929/acc. to EN 55015: 2006 + A1: 2007/acc. to EN 61000 - 3-2/acc. to EN 61547

Benefits
• Easy change of defect ECG thanks to available System+ Guarantee
• Easy integration in luminaire thanks to same dimensions like DALI GI ECG

DALI product features
• Control via the DALI interface
• Compliance with the DALI standard to IEC 60929 and IEC 62386
• Control input protected against overvoltage and polarity reversal (Osram ECG)
Touch DIM and Touch DIM Sensor function
• Manual dimming without any controller and with standard switches
• Including memory function (double click) and soft start

Applications
• Suitable for emergency light installations

Features
• Corridor function for direct connection of ECG to common motion sensor
• Corridor function with pre-programmed light program
• TouchDIM function for free parameterization of light value and turn on time
• Fit for SMART GRID for feedback of consumed mains power and lamp operating hours
• Fit for Emergency function for automatic detection of emergency lighting by ECG
• Very low standby power consumption: < 0.2 W (A1 BAT)
• Lifetime: up to 100000 h (temperature at Tc = 65 °C, max. 10% failure rate)
• Very high number of switching cycles: up to 300000
• Dimming range: 1…100% (3…100% with compact fluorescent lamp)
• POWER2LAMP function for optimal matching of ECG power to lamp during lamp lifetime
• Line frequency: 0 Hz, 50 Hz…60 Hz, rectified