Dimmable operating devices with the 1...10V interface have an attractive price/performance ratio and are very versatile.
Modern dimmable ECGs with 1...10V interfaces in combination with the appropriate controllers and sensors provide the basis for simple and cost-effective lighting systems.
They have become established as the standard for simple lighting solutions. Control gear and controllers are connected to one another via a poled two-wire control line. The control voltage is determined by the dimming setting of the connected ECGs.
Dimmable DALI offers almost unlimited possibilities. Lighting controls, sensors, operating devices, electronic control gears and lamps all work together with this professional interface standard. Bidirectional communication w/o restrictions allow high end light management. DALI – a common interface for all components.
DALI (Digital Addressable Lighting Interface) is a non-proprietary interface standard for dimmable electronic control gears, offering greater functionality and greater ease of use. A maximum of 64 DALI ECGs can be controlled with a high degree of flexibility via a two-wire control line individually or in Broadcast mode and in up to 16 groups.
Areas of application:
-Self-heating: only 5 °C higher than an open ECG
-Outdoor applications in which higher protection against moisture for ECG is needed
-Suitable as additional measure if luminaire does not offer IP67 protection
-Suitable for outdoor installations
-Type of protection: IP67
-Separate installations thanks to optional cable clamp for K2 and K3 casings
-Suitable for indoor installations
-Suitable for various cable types with outer diameter of min. 7 mm to max. 11 mm